Click on picture below for larger version

To the best of our knowledge all details listed below are deemed correct.
It is the buyers responsibility to confirm ALL details prior to purchase.
 
Option: These new machines are being sold as-is with pre-installation checkout
in Chatsworth, Califonia. Parts Warranty Only Starting at: $10,000.00

Equipped With:
   Heavy Duty Cross Roller Bearing Ways
   Dual Ground, Dual Contact "Big Plus" 12,000 RPM Spindle
   21-Tool, High Speed Tool Changer
   2,362 IPM Rapid Traverse Rates
   32-GB High Speed Data Server for Massive Prgram Memory
   High Speed Synchronous Rigid Tapping
   45 PSI Coolant System for Cutting Tools
   Chip Wash Down Coolant Flushing System
   Air Gun & Coolant Gun
   Full Machine Enclosure Including Top Cover
   Spindle Air Blast by M-Code for Through Spindle & at the Cutting Tool
   Portable MPG Hand Wheel with Magnetic Base
   LED Worklight
   Heat Exchanger for Electrical Cabinet
   Machine Condition Signal Lamp - Tri-Color Stack Lamp
   Automatic Pressurized Centalized Lubrication System
   4th Axis Wiring Pre-Installed
   M30 Automatic Power-Off Turn Off the Circut Breaker

**The Mitsubishi control, motors, and drive package are covered by a 3-year

warranty. The Machine Has a One-Year Warranty**

Axis Travel
   X-Axis:                                20.08"        510mm
   Y-Axis:                                16.93"        430mm
   Z-Axis:                                12.99"        330mm
   Spindle Nose To Table Surface:         5.1"-18.1"    130-460mm
   Spindle Centerline To Column:          18.89"        480mm

Work Table
   Table Surface Dimension (X/Y):         22.04" x 15.75"560 x 400mm
   T-Slot Dimension/Spacing:              3-14mm Slots  125mm Spacing
   Table Height:                          35" Above Floor890mm
   Table Weight for Accuracy:             550 lbs       250 KG

Spindle
   Spindle Motor:                         Mitsubishi DJ-D5.5/120-01 - 7.5 HP
   Spindle Motor Coupling:                Inline Direct Drive

   Spindle Speed:                         12,000 RPM

   Synchronous Tapping Speed Limit:       6,000 RPM
   Tapping Performance:                   M20 x 2.5 AluminumM14x2.0 Steel 
   Drilling Performance:                  38mm Aluminum 25mm Steel
   Spindle Torque:                        26 ft-lb @ 1500 RPM
   Tool Type:                             BT#30         4 Bearing Spindle
                                                        2 Top - 2 Bottom
   Spindle Bearing - Inner Diameter:      40mm          P4 Class
                                                        7 Steel Ball Bearings
   Spindle Material / Hardness:           SCM415        HRC 58-62
   Retention System / Holding:            MAS-P30T-1    Bellville Spring Stack

                                                        1650-1760 lbs

   Spindle Runout:                        <0.000040" TIR / Pull Stud USST B30-4500H


Axis Feeds (X/Y/Z)
   Rapid Traverse:                        2,362 IPM     60/60/60m/minute
   Rated Cutting Feedrate:                0.04 - 1181 IPM30/30/30m/minute

   Mechanical Way System:                 Roller Bearing WaysRoller Ways 30/30/35mm

   Axis Drive Motor Power:                2 HP /3 HP    1.5 kw/2.2 kw w/ Brake

   Axis Thrust Force:                     3,335lbs/3,692lbs14840 N/16430 N
   Ballscrews:                            32mm          16mm Pitch

   Positioning Accuracy:                  +0.00015"     +0.004mm

   Positioning Reapeatability:            +0.00008"     +0.002mm
   Least Input Command Increment:         0.0001" / 0.000040"0.001mm 40 Millionths


Tool Changer
   Tool Capacity:                         21-Tools      Drum turret
   Tool Shank:                            BT#30         MAS P30T-1 Pull Stud
   Tool Change Time:                      1.6 Sec       Servo Motor Driven
   Tool Diameter with Adjacent Tool:      2.36"/3.15"   60mm/80mm w/No Tool
   Tool Length / Max. Tool Weight:        7.87"/6.6 lbs 200mm/ 3 kg
   Tool Selection / Tool Access:          Random        Bi-Directional

General
   Air Service Requirements:              85 psi @ 5 scfm6 kg/cm2
   Electrical Requirements:               16kva, 40 Apms22vac+5%, 60hz 
   Coolant Pump - Chip Flush Pump:        1.0 HP        .75kw
   Cutting Tools - HP / Pressure:         1.0 HP / 45 PSI.75kw
   Coolant Tank Capacity:                 32 Gallons    120 Liters
   Machine Dimesnions:                    50"x87"x95"   125x221x241 cm
   Machine Weight:                        6,110 lbs     2,770 kg

Genmill T-500 Machine Options
   Factory machine installation: "Peace-of-Mind Factory Installation"
*Includes Expenses*:                                    POR


   Factory on-site 3-day machine operation and program training

*Includes Expenses*:                                    POR


   Automatic Operator Door:                             POR

   Belt-Style Rear Discharge Chip Conveyor:             POR

   Auger-Style Chip Conveyor:                           POR

   15,000 RPM Spindle Speed Upgrade:                    POR

   Second-Year Machine Warranty:                        POR

   Voltage Stabilizers and Transformers 
(specify voltage needs):                                POR

   Air Conditioner for Electrical Cabinet 
Refrigerated-Style,Upgrade Over Standard Heat Exchanger:POR


   375 PSI Through-The-Spindle-Coolant Prep:            POR


   375 PSI Through-The-Spindle-Coolant Upgrade 
(25-Bar - No Additional Coolant Tank Supplied:          POR


   Linear Scales For All 3-Axis
Heidenhain5um Optical Liner Scales:                    POR

RETURN to listing display       RETURN to our home page