Click on picture below for larger version

To the best of our knowledge all details listed below are deemed correct.)
It is the buyers responsibility to confirm ALL details prior to purchase.

Equipped With (Must Be Verified By Buyer):+
 =Brother cnc control with 14" lcd screen+
 =5-Axis Trunnion+
 =Fanuc Robot LR Mate 100iB, Load/Unload Robot+
 =RS-232C port interface for dnc operation+
 =Rigid tapping (synchronous / solid tapping)+
 =Fully enclosed+
 =Available manuals+


General Specifications As Per Brochure:
  Table size:                                  31.5" x 12.6" 
  Max. table load (evenly distrib.):           551 lbs 
  Spindle nose to table top:                   7.1" - 18.9" 
  X-Axis travel:                               27.6" 
  Y-Axis travel:                               15.7" 
  Z-Axis travel:                               11.8" 
  Rapid traverse rate all axes:                1969 ipm 
  Cutting feed rate x & y axes:                0.04 - 394 ipm 
  Cutting feed rate z axis:                    0.04 - 787 ipm 
  Spindle speeds:                              16 - 16,000 rpm 
  Max tapping speed:                           6000 rpm 
  Spindle taper:                               BT 30 
  Spindle motor:                               10 hp 
  Tool changer capacity:                       14 stations 
  Tool change time (tool to tool):             0.9 seconds 
  Tool change time (chip to chip):             1.7 seconds 
  Max. tool length:                            9.8" 
  Floor space (w/o conveyor):                  84" x 112" x 103" 
  Approx. weight:                              5,300 lbs 

RETURN to listing display       RETURN to our home page