General Specifications As Per Brochure

Max. Pressure:                           100 Bar

                                         1500 PSI

Coolant Volume:                          Automatically Variable
                                         8 - 40 Liters / Minute
                                         3 - 10.5 GPM

Tank:                                    380 Liter / 100 Gallon
Filtration:                              Single Bag
Outlets:                                 1


Standard Configuration:
  The ChipBLASTER JV-40 is fed by a transfer pump that draws from the machine

tool sump, through the filter vessel to the integral 380 liter (100 gal) tank. 

When the machine tool calls for coolant, the filter pump(s) draws the coolant

from the ChipBLASTER tank and pumps through the post (safety) filter to the

inlet of the positive displacement pump. The coolant then flows at high

pressure through a series of distribution and safety valves and on to the

machine tool.

M Code Requirement:
  Latching "M" code controlled signals will be required for

activation/deactivation of the ChipBLASTER. A 24 VDC,110 VAC or 240 VAC signal

is needed.
  *  If your machine uses pulsed "M" Codes, please contact ChipBLASTER.

Required Electrical Power:
  37 amps, 230 VAC, 3 Phase, 60 Hz
  19 amps, 460 VAC, 3 Phase, 60 Hz
  22 amps, 400 VAC, 3 Phase, 50 Hz

**Ideal for Machine Tools Up to 20 Kw (25 HP)

See brochure for more details and options.

      RETURN to our home page