General Specifications As Per Brochure

Max. Pressure:                           80 Bar
                                         1200 PSI
Coolant Volume:                          Fixed Rate System
                                         90 Liters / Minute
                                         24 GPM
Tank:                                    380 Liter / 100 Gallon
Filtration:                              Dual Parallel Bags
Outlets:                                 3


The J3-90 operates as three completely independent 30 liter
(8 gpm) modules for multiple outlet machines or as a single
90 liter (24 gpm) fixed volume unit.


Standard Configuration:
The ChipBLASTER J3-90 is fed by a transfer pump that draws from the machine

tool sump, through the filter vessel to the integral
380 liter (100 gal) tank. When the machine tool calls for coolant, the filter

pump(s) draws the coolant from the ChipBLASTER tank
and pumps through the post (safety) filter to the inlet of the positive

displacement pump. The coolant then flows at high pressure
through a series of distribution and safety valves and on to the machine tool.

M Code Requirement:
  1 "M" Code Controlled Signal is Required to Operate as One High Volume

  Outlet
  3" M" Code Controlled Signals are Required to Operate as Three Independant

  Modules
24 VDC, 110 VAC or 240 VAC Signal is Acceptable
*If your machine uses pulsed "M" codes, please contact ChipBLASTER

Required Electrical Power:
  74 amps, 230 VAC, 3 Phase, 60 Hz
  37 amps, 460 VAC, 3 Phase, 60 Hz
  45 amps, 400 VAC, 3 Phase, 50 Hz

Ideal for Machine Tools Up to 45 Kw (60 HP), Three Turret Lathes & 50 Taper

Mills.

See brochure for more details and options

RETURN to listing display       RETURN to our home page