Click on picture below for larger version

General Specifications As Per Brochure

Pressure:                                1500 PSI

Coolant Volume:                          Automatically Variable
                                         3 - 16 GPM
Tank:                                    126 Gallon

Filtration:                              Single bag
Outlets:                                 1


Standard Configuration:
The ChipBLASTER EV-60 is fed by a transfer pump that draws from the machine

tool sump, through the filter vessel to the integral 480 liter (126 gal) tank. 

When the machine tool calls for coolant, the filter pump(s) draws the coolant

from the ChipBLASTER tank and pumps through the post (safety) filter to the

inlet of the positive displacement pump. The coolant then flows at high

pressure through a series of distribution and safety valves and on to the

machine tool.

M Code Requirement:
Latching "M" code controlled signals will be required for

activation/deactivation of the ChipBLASTER. A 24 VDC,110 VAC or 240 VAC signal

is needed.

*If your machine uses pulsed "M" codes, please contact ChipBLASTER

Required Electrical Power:
52 amps, 230 VAC, 3 Phase, 60 Hz
26 amps, 460 VAC, 3 Phase, 60 Hz
31 amps, 400 VAC, 3 Phase, 50 Hz

Ideal for machine tools up to 30 kw (40 hp)

See Brochure for more details and options

RETURN to listing display       RETURN to our home page