Click on picture below for larger version

The Master 865 Verso is a premium bar feeder, for those who are looking for

high performance: elevated rigidity, simplicity of use, fast bar rotation,

reduced time for retooling.                    
  
Technical Specs                                

ROUND BARS                                     8 - 65 mm (5/16 - 2 5/8")
HEXAGONAL BARS                                 8 - 55 mm (5/16 - 2 3/16")
SQUARE BARS                                    8 - 45 mm (5/16 - 1 3/4")
BAR LENGTH                                     1,000 - 4,300 mm (3'3" - 14'1")
REMNANT LENGTH                                 110 - 400 mm (4.33 - 15.75")
BAR WEIGHT                                     Max 120 kg (265 lbs)
BAR CHANGEOVER TIME                            45 sec (for bar length of 3,200

mm)
FEED RATE                                      500 mm/sec (1,180 in/min)
RETURN SPEED                                   1,000 mm/sec (2,360 in/min)
BAR FEEDER WEIGHT                              12' version: 1,440 kg (3,180

lbs)
COMPRESSED AIR                                 6 - 8 bar (87 - 116 psi)
INSTALLED POWER                                3.75 kW
MP MAGAZINE AVAILABLE                          Single Rack 320 mm (12.6")
UP MAGAZINE AVAILABLE                          NO
   20 feet version:                            UP (Lower Single Rack) 
                                                 600 mm (23.62")
                                                (900 mm (35.43) or 
                                                 1,200 mm (47.24") opt avail

OAB/F MAGAZINE AVAILABLE                       NO
  


Prices (subject to change without notice)


Bar Feeder                                                        

Master 865 Verso MP 12 feet                                       $48,990
Master 865 Verso MP 14 feet                                       $54,990
Master 865 HD 20 feet with UP (Lower Single Rack) Magazine        N.A.

All bar feeders include: standard electrical and mechanical interface to the

lathe, Single Rack magazine, remnant retraction system, front bushing device

and 1 guide channel set (1 Guide Channel, 1 Bar Pusher, 1 Rotating Tip, 1

Front Nose, 1 Collet and 1 Split Bushing)                         
  
Accessories                                                       

Category III interface (Dual Channel Safety Circuit Protection)   $1,490
Special adaptation kit (Required for some lathes)                 $1,990
  
Options                                                           

Touch screen 7" panel                                             $490
Additional guide channel set                                      $3,490
Spindle liner                                                     $450
Additional collet (standard OD threaded collet) (20mm < D < 52mm) $120
Additional collet (standard OD threaded collet) (52mm < D < 80mm) $190
Additional split bushing                                          $150
Kit for additional status lights                                  $80
Kit for Industry 4.0                                              $2,990
  
Installation                                                      

Installation in USA, Canada and Mexico                            $3,300

Installation price includes labor, travel expenses, on site operator training

at the time of installation, 12 month parts and labor warranty    

RETURN to listing display       RETURN to our home page