|
To the best of our knowledge all details listed below are deemed correct.
It is the buyers responsibility to confirm ALL details prior to purchase.
==========================================================
KE-NEW CONDITON.
8 FOR $189,500.00
AND ONLY RAN ONLY PLASTIC
================================================================
Equipped With:
FMB MicroMag 20 Magazine Bar Loader, 12ft bar cap, s/n 28-0531R1617500
Walking beam bar separation system - drops out of the way when running
larger diameter bars
Complete with 2-Guide Channels (10mm & 20mm)
Axial Shift option
MP Systems High Pressure Coolant System, s/n NC08-30-1P-0T-150-CVPV
Harbor HJ-750PSA2 Coolant Chiller s/n LC321457
TriMist Mist Collector
Parts Conveyor
Chip Conveyor
Air Blast
Synchronous Rotary Guide-Bushing Holder
Non-Guide Bushing Holder (Chucker Kit)
Parts catcher
Parts conveyor w/ output ramp & collection bin Cutoff confirmation sweep-
arm switch
Sub-spindle programmable air blast and finished parts ejector
High-Performance "C"-Axis on both the main and sub spindle
Rigid Synchronous Tapping
Manifold for 4-High Pressure Oil Ports
Cutting oil chiller system - 18K BTU's (For Machine Thermal Stabalization)
Coolant flow confirmation monitoring switch w/ fault interrupt interface
8-live-tool ER-16 collet spindles (3-not mounted)
3-Postion Z-axis (Live Face) Tool
Collets, TF-25: 3/8", 7/16", 1/2"
Guide Bushings, TD25S: 3/8", 7/16"
(4) Foot pads
Manuals: Ganesh Operations, Parts, Electrical, Mitsubishi M800/M80
Tool Box
** Machine is like New
** Ran only delron
On-time ONLY 430 hours
=======================================
GENERAL SPECIFICATIONS:
Main Spindle:
Spindle Speed/Bearing: 10,000 RPM/5-Bearing Spindle
Spindle Motor: 5 HP
Collet Style for Main/Sub Spindle: Hardinge TF-25S/ S&M TS-25
Synchronous Rotary Guide Bushing: TD25S
Barstock Diameter: 23mm (3/4")
Distance Between Spindles: 23.6" (600mm)
Spindle Centerline Height: 42" (1060mm)
Main Spindle Tooling:
OD Turning Tool Holders: 6 - 12mm
ID Internal Tool Holders: 4 - 22mm
ID Deep Hole Drill Positions: 2 - 22mm
Cross Slide Live Tools: 5 - ER16 (8,000 RPM)
Drilling/Tapping Capacity: 10mm Drilling / M8 Tap
Cross Drilling/Tapping Capacity: 8mm Drilling / M6 Tap
Sub-Spindle:
Spindle Speed/Bearings: 8,000 RPM / 4-Bearing Spindle
Sub-Spindle Motor: 5 HP
Collet Style for Main/Sub Spindle: =Hardinge TF-25S/ S&M TS-25
Barstock Diameter: 23mm (3/4")
Workpiece Length for Front Ejection: 110mm
Sub-Spindle Tooling:
OD Turning Tool Holders: 3 - 10mm
ID Internal Tool Holders: 4 - 22mm
ID Internal Tool Holders: 3 - ER-16 Fixed Tools (3/8")
Sub Spindle Axiel Live Tools: 3 - RE-16 Live Tools (4,000 RPM)
Backworking Machining Length: 6.1" Turning Length / 3.14" Boring
Drilling/Tapping Capacity: 10mm Drilling / M8 Tapping
Cross Drilling/Tapping Capacity: 8mm Drilling / M6 Tapping
Axes:
Main Spindle Stroke: 9.840" Single Stroke (250mm)
Turning Length (Rotary Bushing): 7.48 (190mm)
Turning Length (Without Bushing): 2.36" (60mm)
X1, Y1, Z1, X2, Y2, Z2 Rapids: 944 IPM (24m/minute)
X1, Y1, Z1 Axis Motor Power: 1 HP
X2, Y2, Z2 Axis Motor Power: .67 HP
Minimum Input Unit: 0.0001"
Power: 220 Volts/3 Phase/ 60hz/ 60 Amps
Sold As-Is, with a start-up warranty, FCA Colorado
Machine: 120" x 60" x 84" 6,000 lbs
Barfeed: 230" x 32" x 54" 2,500 lbs
Chip Conveyor: 94" x 22" x 38" 1,500 lbs
Chip Pan 1: 55" x 48" x 13" 150 lbs
Chip Pan 2: 49" x 37" x 19" 180 lbs
HPC: 46" x 24" x 46" 500 lbs
Mist Buster: 30" x 28" x 24" 225 lbs
Oil Chiller: 27" x 23" x 59" 300 lbs
Chip Cart: 39" x 22" x 33" 190 lbs
RETURN
to our home page