|
To the best of our knowledge all details listed below are deemed correct.
It is the buyer's responsibility to confirmed prior to purchase.
Equipped with (must be verified by buyer):
LNS Alpha ST320 S2 Magazine Bar Feed
with 16, 20 and 25mm channels
LNS Turbo Chip Conveyor
On Hours: Approx 6800 hours
Cutting Time: Approx 1500 hours
Specification from OEM Brochure (All details should be confirmed by buyer):
Control: Fanuc 0iTF
Number of Controlled Axes: 7
X1, Y1, Z1, X2, Z2, C1
Barstock Working Range: 3 - 20mm
Max Machining Length/stroke: 210 w/ rotary guide bushing
45mm Non-Guide Bushing
Max Main Spindle Drilling Diameter: 10mm
Max Main Spindle Tapping Diameter: M10
Max Back Spindle Drilling Diamter: 8mm
Max Back Spindle Tapping Diameter: M8
Max Cross Drilling Diameter: 6mm
Max Cross Tapping Diameter: M5 x 0.8
Max Back Drilling Diameter: 6mm
Max Back Tapping Diameter: M5
Main Spindle Speed: 200 - 10,000 rpm
Back Spindle Speed: 200 - 12,000 rpm
Main Spindle Indexing: Full C
Back Spindle Indexing: 1 degree
Tool Storage Capacity 21 Tools
4 Live
4 ID/ 4BW
5 OD
4 BW
Tool Size: 12mm x 12mm x 85mm
Main Spindle Motor: 2.2 / 3.7 kW
Back Spindle Motor: 1.5 / 2.2 kW
X1, X2, Y1, Z1, Z2 Axes Motors: 0.5 kW
Cross Drill Motor: 0.18 kW
Lubricating Oil Pump Motor: 3 W
Power Source Requirement: 11KVA
Machine Dimensions (approx): 65" x 43" x 67", 3800 lbs
RETURN
to our home page