Click on picture below for larger version

To the best of our knowledge all details listed below are deemed correct.
It is the buyers responsibility to confirm ALL details prior to purchase.

Option: This is virtually a new machines and is being sold as-is with a start-

up warranty only covering that the machine will power up and function normally
Delivery, Installation & Training can be quoted separately.



Equipped With:
   Synchronous Rotary Guide-Bushing Holder 
   Non-Guide Bushing Holder (Chucker Kit)
   Parts catcher and finished parts conveyor w/ output ramp & collection bin

   Cutoff confirmation sweep-arm switch 
   Sub-spindle programmable air blast and finished parts ejector

   High-Performance "C"-Axis on both the main and sub spindle

   Rigid Synchronous Tapping
   Enclosure pre-drilled and tapped for 4-High Pressure Oil Ports
   Cutting oil chiller system - 18K BTU's (For Machine Thermal Stabalization) 
   Coolant flow confirmation monitoring switch w/ fault interrupt interface 
   8-live-tool ER-16 collet spindles (3-not mounted)
   3-Postion Z-axis (Live Face) Tool
   Collets, TF-25: 3/8", 7/16", 1/2" 
   Guide Bushings, TD25S: 3/8", 7/16"  
   (4) Foot pads
   Manuals: Ganesh Operations, Parts, Electrical
   Manuals: Mitsubishi M800/M80
   Tool Box


General Specifications:

MAIN SPINDLE:
Maximum RPM / spindle bearing:            10,000 RPM (5-bearing spindle, 3-

front, 2-rear ball bearings) 
Main Spindle Servo Motor:                 5- HP 15 Min Duty Rated (3HP

Constant) Collet Style for main & subspindle:                      Hardinge TF-

25S / S&M TS-25 / Star SR-20 Collet Actuation System:              Pneumatic

Piston Driven Toggle Clamp
                                          Feed Finger Style Synchronous Rotary

Guide-Bushing:                            TD25S (20mm round, 16mm Hex, 12mm

Square) Maximum Barstock Diameter:        23mm (Collet Range - 1/16"-13/16")

Maximum Distance between Spindles:        23.6" (600mm) Spindle Centerline

Height:                                   42" (1060mm) 
MAIN SPINDLE TOOLING:                     17-Tool Holders - (30 Standard

Total) 
O.D. Turning Tool Holders-S1:             (6) 12mm square shank turning tool

holders
I.D. Internal Tool Holders-S1:            (4) 22mm Shank Round Tool Sleeve

Bores I.D. Deep Hole Drill Positions-S1   (2) 22mm Shank Round Tool Sleeve

Bores Cross slide live tools-S1:          (5) ER-16, 8,000 RPM, 1.6 HP (1.2kw)

Axial front slide live tool opt.S1:       (3) ER-16 - Optional in Lieu of 1

Cross T.  Maximum Drilling/Tapping Capacity:                       10mm

Drilling/M8 Tapping - Main Spindle Cross Drilling / Tapping Capacity:8mm

Drilling/ M6 Tapping - Cross Tools 
SUB SPINDLE:
Sub spindle RPM / spindle bearing:        8,000 RPM/4 Bearing - Quad Duplex

Sub Spindle Servo Motor (2.2/3.7kw)       5-HP, 15 Min Duty Rated (3HP

Constant) Collet Style for main & subspindle:                      Hardinge TF-

25S/ S&M TS-25/ Star Sr20 Collet Actuation System:                 Pneumatic

Piston Driven Toggle Clamp Barstock Diameter:                      23mm

(Collet Range - 1/16"-13/16"
Finished Parts Ejector & Air Blast:       Included (Can Pass Long 20mm Thru

Sub Spi.  workpiece length/front ejection:                         110mm part

length for front ejection 
SUB-SPINDLE BACK-WORKING TOOLING:         13-Tool Holders O.D. Turning Tool

Holders-S2:                               (3) 10mm Square Shank Turning Tool

Holders I.D. Internal Tool Holders-S2:    (4) 22mm Shank Round Tool Sleeve

Bores I.D. Internal Tool Holders-S2:      (3) ER-16 Fixed Tools - 3/8" Max. 

Subspindle axial live tools-S2:           (3) ER-16 Axial Live Tools 4,000

RPM/ 1 HP 
   (2 radial live tools are available - one for each inboard axial driven tool

   on subspindle tool block)

Backworking machining length:             6.1" Turning / 3.14" Boring

Drilling/Tapping Capacity:                10mm Drilling / M8 Tapping Cross

Drilling/Tapping Capacity:                8mm Drilling / M6 Tapping 
AXIS:
Main Spindle Stroke:                      9.840" Single Stroke (250mm) Turning

Length-Rotary Bushing:                    7.48" (190mm) Turning Length-Without

Bushing                                   2.36" (60mm) X1,Y1,Z1,X2,Y2,Z2 Rapi

Traverse:                                 944 IPM (24m/minute) X1,Y1,Z1 Axis

Motor Power:                              1-HP (.75kw) X2,Y2,Z2 Axis Motor

Power:                                    .67-HP (.5kw) Minimum input

unit:                                     0.0001" (0.001mm = 40 millionths) 
MACHINE SPECIFICATIONS:
Machine Dimensions (L x W x H):           118" x 55" x 78" (2846 x 1284 x 2024

mm) Machine Weight:                       5,954 lbs (2700kgs) Coolant Pump

Power:                                    1.5-HP (1.2kw) Coolant Tank

Capacity:                                 58-Gal Coolant Tank (220L) (Oil

Only) Lubrication distribution-2-liter    Way lube @ 3-6cc / 15 Minute Cycle

Machine Power Requirements:               220vac, +5%, 53 Amps, 20kva, 3-

Phase, 60hz Air Requirements:             85-PSI @ 6-CFM 

RETURN to listing display       RETURN to our home page