Veiw a video demonstration of this machine by clicking the link below.
https://youtu.be/qpys5FqUeNg
To the best of our knowledge all details listed below are deemed correct. It
is the buyer's responsibility to confirm all details and we encourage an
inspection of the machine(s) and accessories prior to purchase.
Equipped with:
Fanuc 0iTD Control
FMB Turbo 3-38 Magazine Bar Feed
w/ 38mm guide channel
Long Part Attachment
MP Systems V2-HO8 8-line High Pressure Coolant System
runs water @ 2000 psi
runs oil @ 1000 psi
conversion kit for gear pump avail for oil @ 2000 psi
Mist Collection System
LNS Turbo MH500 Chip Conveyor
Fire Supression System
Approx 1500 run hours
Approx $250K new as equipped.
General Machine Specifications per Manufacturer's Brochure
Control Fanuc 0i-TD
Axses X1,Z1,Y1,X2,Z2,C1,C2
Working Barstock Diameter 8 - 38mm
Max Machining length: 250mm
Max Main Spindle Drilling Dia: 13mm
Max Main Spindle Tapping Dia: M12
Max Back Spindle Chucking Dia: 38mm
Max Back Spindle Drilling Dia: 12mm
Max Spindle Tapping Dia: M12
Max Cross Drilling Dia: 10mm
Max Cross Tapping Dia: M8
Max Tool Spindle Slotting Cutter Dia: 45mm
Max Back Drilling Dia: 8mm (Optional)
Max Back Tapping Dia: 6mm (Optional)
Machine:
Main Spindle Speed: 200-6,000 RPM
Main Spindle Indexing: C-Axis
Back Spindle Speed: 200-7,000 RPM
Rotary Guide Bushing Speed: 200-6,000 RPM
Tool Spindle Speed: 200-5,000 RPM
Tool Storage Capacity (Std/Opt): 20/31
Tool Size: 20mm x 20mm x 125mm
Rapid Traverse Rate: 45 m/min (X1,Y1,Z1: 24 m/mm)
(X2: 32 m/mm)
Motors:
Controlled Linear Axes: 5-Axis
Main Spindle: 7.5/11 Kw
Back Spindle: 3.7/5.5 Kw
Axis: Z1:1.2 Kw/X1,Y1:0.75 Kw
X2,Z2: 2.5 Kw
Cross Drill: 1.0 Kw
Coolant Pump: 0.4 Kw
Lubricating Oil Pump: 3 W
Power Source: 30 Kva
Compressed Air Requirement: 0.4 MPA or Above
Air Discharge Rate: 100 NL/Min
Coolant Tank Capacity: 195 L
Machine Dimensions: 100" x 53" x 78"
Machine Weight: 10,141 lbs
