3/4" NEXTURN SA20D, Fanuc 18iTB, 2008, 9 Rot Tools, 7' Bar Ldr, Thread Whirler   Our stock number: 396485

3/4 NEXTURN SA20D, Fanuc 18iTB, 2008, 9 Rot Tools, 7' Bar Ldr, Thread Whirler

Click on picture below for larger version
3/4 NEXTURN SA20D, Fanuc 18iTB, 2008, 9 Rot Tools, 7' Bar Ldr, Thread Whirler3/4 NEXTURN SA20D, Fanuc 18iTB, 2008, 9 Rot Tools, 7' Bar Ldr, Thread Whirler3/4 NEXTURN SA20D, Fanuc 18iTB, 2008, 9 Rot Tools, 7' Bar Ldr, Thread Whirler

General Specifications per Brochure:

Equipped With (To be Verified by Buyer):
    MTA Tracer Bar Loader, 6' bar capacity and 20mm channel
    Part Catcher
    Part Conveyor
    Thread Whirler

Condition: machine appears to be very clean with low hours


This is the new design with Built-in Direct Drive Spindles for both the Main

and the Sub Spindle

Control:                                      Fanuc 18-iTB (dual processors)
No. of Controllable Axes:                     7
                                              Z1, X1, Y, Z2, X2, C1, C2
Max. Bar Diam.:                               20mm  (.787")
Max. Turning Length:                          210mm (8.27"
Max. Main Spindle Drill/Tap:                  10mm/M8 (.393")
Max. Sub Spindle. Diam.:                      20mm  (.787")
Max. Back-End Face Drill/Tap:                 6mm/M6  (.236")
Max. Cross Drill/Tap:                         6mm/M6  (.236")
Max. Cross Disc Mill Diam.:                   32mm    (1.259")
Main Spindle Speed:                           8000 rpm
Max. Sub Spindle Speed:                       8000 rpm
Max. Cross Spindle Speed:                     8000 rpm
Number of Tools:                              18
    OD:                                       5
    Live:                                     5
    ID Front Face:                            4 Live (drive off the sub)
    BW Back-End Face:                         2 Live + 2 fixed
Tool Shank:                                   12 x 120 mm
Spindle Indexing (Main & Sub):                C-Axis (0.001 Degree)
Motor:
    Main:                                     2.2/3.7KW
    Sub:                                      2.2KW
    Cross Drill:                              1.1KW
    Rotary Guide Bushing:                     1.1KW
Electrics:                                    220V 60A 50/60 Hz
Dimensions (approx):                          77" x 53" x 66"
Weight (approx):                              6500 lbs

Machine:  78" x 57" x 91" 6,500 lbs
Barfeed:  100" x 19" x 51" 2,000 lbs
Chip Pan: 47" x 55" x 20" 150 lbs

Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

RETURN to listing display       RETURN to our home page