Click on picture below for larger version

All Information From OEM Brochure Should Be Verified By Buyer:

Equipped With:
   Fanuc LH-1 CNC Control
   Iemca Boss 432/37 Bar Loader
   Parts Catcher
   Misc Collets & Guide Bushings

General Specifications: 

Maximum Bar Diameter:                       1 1/4"
Z1-axis Travel  (synchronous to "Z2"):      9.75"
Main Spindle:
   Spindle Speed:                           200 to 7,000 rpm
   Indexing:                                Full C-axis (.001 degree)
Programmable Servo Axis Designations:
   "Z1" Main Headstock in and out:          9.75"
   "T1" OD Tool Slide up and down:          11.6"
   "X1" OD Tool Slide right and left:       2.28"
   "X2" IDd. Tool Slide up and down:        8.66"
   Auxiliary Slide Motion:
   "Z2" ID Tool Slide in and out:
   (Synchronous to "Z1"):                   7.88"
Sub-spindle Specifications:
   Maximum Diameter:                        1 1/4"
   Maximum Drill Capacity - mild steel:     .472"
   Maximum Tap Capacity - mild steel:       .393"
   Speed Range (serial interface):          200 to 6,000 rpm
   Power Rating:                            2.7 HP
   Sub-spindle Indexing:                    5 degree increment
Part Ejection:                              front or rear ejection
Horsepower of Main Spindle:                 7.5 HP
Driven Tool Drive Motor Rating:             1.5 HP
Maximum Speed Cross Tool T10-T12:           200-5,000 rpm
Maximum Speed Cross Tool T13:               120-3,000 rpm 
Number of Tool Stations:                    6 OD, 5 ID, 3 ID/OD B/W tools
                                            4 Cross Driven Tools, 2 Driven B/W
Tooling Sizes, Turning:                     5/8" square
Dimensions (apprx):                         88" x 60" x 7'h
Weight (apprx):                             6000 lbs.

RETURN to listing display       RETURN to our home page