Equipped with (must be verified by buyer):

Tool Head 

General Specifications As Per Brochure:

Max Stock Diameter: 5/32" (4mm) 
    Feed Range 
    ...Standard Lever ratio 2:1: 0.950 (24mm) 
    ...Special Lever ratio 3:1: 9/16" (15mm) 
    ...Long feeding device ratio 1:1: 1.850" (48m 
    ...Long feeding device ratio 1:1.2: 2.25" (57.5mm) 
    ...Long feeding device ratio 1:1.2: 2.25" (57.5mm) 
    ...Double feed without drilling: 4.25" (110mm) 


 Production Range with Turret Indexing: 1.25 - 31.5 p/Min 
    ................without Turret Indexing: 1.25 - 63 p/Min 
    Number of production cycles: 35 
    Max drilling depth: 9/16" (15mm) 
    Max axial Movement of counter collet spindle: 1" (26mm) 
    Max clamping diameter of drilling spindle: 1/8" (3mm) 
    Max clamping diameter of counter collet: 5/32" 94mm) 
    Drilling spindle speeds: 3000,5000,8000,12000 RPM 
    Turret Indexing time: 1/3 Sec 
    Number of cutting tools: 2 
    Drum turret: Yes 

Rotating tool head 
    ...Max radial movement of both cutting tools together.. 
    .....with Standard Toolhead Ratio 3:1: .160" (4.1mm) 
    ....." Special "     " 6:1: .080" (2.05mm) 
    ....." Special "     " 2:1: .240" (6.15mm) 
    ...Toolhead speeds: 600 or 4000 RPM 
    Coil Dereeler: Inside/ Outside Dia: 6.7-12.5"/17.7" 
     Main Motor: 0.75 HP 
    Straightener motor: 0.50 HP 
    Dimensions: 27" x 70" 
    Weight: 2500 Lbs 

RETURN to listing display       RETURN to our home page