![]() |
To the best of our knowledge all details listed below are deemed correct. It is the buyer's responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase. CREST with CLWS-3-STD......... $28,500.00 (A&M ID #404436) CREST without CLWS-3-STD ........ $18,500.00 (A&M ID #404436) CLWS-3-STD by itself ......... $12,500.00 (A&M ID #404558) The following Items is over $20,000 new: * Model CLWS-3-STD, Closed Loop Water Conservation System, System is designed to provide DI water for final rinse of components and then recycle that water for continuous reuse. The CLWS will reduce water usage for the cleaning system by 90% while providing spot free rinse of parts being cleaned. System returns water from final rinse tank to on board gravity fed heated reservoir. Buer will rent the carbon and mixed bed bottles and this unit reprocesses at a 3-5 gpm rate the final rinse water. So instead of flowing 60 gallons of water down the drain the CLWS saves 90% so the system is only dumping 6-10 gallons down the sewer an hour. Capacity: 5 gpm Incoming Filter: 5 micron (from tap or RO source) Reservoir: A stainless steel holding reservoir, with liquid level controls. Heat: 15000 watts of screw-plug immersion heat. Temperature control: Includes a digital indicating temperature control. Includes an RTD-type temperature probe. Includes over-temperature safeties. Transfer pump: A centrifugal pump, with a stainless steel head and a TEFC motor. Canister: Canisters are NOT included. These canisters or bottles can be leased and serviced by your local water treatment service company such as Evoqua with two each carbon and two each mixed Ion resin exchange A resistivity monitor. Sterilizing: An ultraviolet sterilizing light. Monitors: An analog pressure gauge Outgoing Filter: 5 micron Power req's: 240 volts/3 phase/60 hz/43 amp