Specification from OEM Brochure (All details should be confirmed by buyer)


Equipped With 
Face Plate 
18" Bison 4-Jaw Chuck 
3 Point Steady Rest 

General Specification:
Swing Over Bed                          18.1" 
Center Distance                         55" (60" overall)
Swing Over Cross Slide                  10.6" 
Swing in Gap                            28.7" 
Gap Width in Front of Faceplate         8.5" 
Spindle Center High From Floor          45" 
Width of Cross Slide                    8" 
Type of Cross Slide Ways Dovetail 
Bed Width                               15.7" 
Type of Bed Ways V and Flat Ways 
Coolant Tank Capacity                   25 Gallons 
Spindle Nose                            D1-8 
Spindle front Bearing I.D.              5.25" 
Spindle Taper                           5 MT 
Spindle Bore                            3.07" 
Speed Ranges (Auto Selected)            3 
Spindle Speed - Low Range               1 - 247 RPM 
Spindle Speed - Medium Range            1 - 740 RPM 
Spindle Speed - High  Range             1 - 2200 RPM

Spindle Drive Variable AC 
Spindle Motor (Cont./30 min)            10/15 HP 
Min. Spindle Speed for Full Power       71 RPM 
Power Consumption                       26 KVA 
Cross Slide Travel (X Axis)             11.7" 
X Axis Rapid Traverse                   315"/min 
X Axis and Z Axis Feed Rate             .0012" - 236"/rev. 
X Axis Thrust (continuous)              1,464 lbs. 
X Axis Ballscrew                        25 x 4 mm 
Saddle Travel (Z Axis)                  55.0" 
Z-Axis Rapid Traverse                   394"/min 
Z Axis Thrust (continuous)              2,196 lbs 
X Axis Ballscrew                        40 x 8 mm 
Positioning Accuracy                    0.0002" 
Repeatability                           0.0001" 
Tailstock Taper                         6MT 
Tailstock Quill Diameter                3.74" 

      RETURN to our home page