This unit will be serviced and guaranteed to be in good working condition by Crest authorized service technicians -Power: 480V, 87.0 Amp, 3 Phase, 50/60 HZ -Allen Bradley Model SLC-502 Programmable Logic Control w/ an Allen-Bradley -Panelview 550 Display -6-Station Station #1 - Ultrasonic Immersion Wash -Immersion Wash w/ overflow weir plumbed to the recirculation/filtration loop. -High-intensity ultrasonics w/ 2000 watts of power. -Pump and filter canister w/ 10 micron bag filter & 7-10 GPM recirculation rate. -Inline heat exchanger to dissipate heat from the recirculation / filtration loop. -Thermostatically-controlled strip heaters sized for a total of 4000 watts output. Station #2 - Ultrasonic Emulsion Rinse -Emulsion Rinse w/ overflow weir plumbed to the recirculation / filtration loop. -Ultrasonics w/ 2000 watts of power. Pump & filter canister w/ 10 micron bag filter and 7 - 10 GPM recirculation rate. -Decanting system to recycle decanted solvent. -Thermostatically controlled strip heaters sized for a total of 4000 watts output. Station #3 - Ultrasonic Spray-Over-Overflow Immersion Rinse #1 -Immersion Rinse w/ overflow weir plumped to drain. -Incoming water cascades from station #4. -Ultrasonics w/ 1500 watts of power. -Thermostatically controlled strip heaters sized for a total of 6000 watts output. -Parallel-opposed, side-mounted spray rinse headers located above the immersion sump to spray rinse parts after immerson rinsing. Station #4 - Spray-Over-Overflow Immersion Rinse #2 -Immersion rinse w/ overflow cascade to Station #3. -Thermostatically controlled strip heaters sized for a total of 6000 watts output. -Parallel opposed, side mounted spray rinse headers located above the immersion sump to spray rinse parts after immersion rinsing. Station #5 - Recirculating Hot Air Dryer -Recirculating hot air chamber w/ side plenum & down draft. -Thermostatically controlled air heaters sized for a total of 12500 watts output. -One (1) set of parallel-opposed air headers located near the top of the tank to blow-off parts before entry in the recirculation portion of the dryer. Station #6 - Recirculating Hot Air Dryer -Recirculating hot air chamber w/ side plenum & down draft. -Thermostatically controlled air heaters sized for a total of 12500 watts output. -One (1) set of parallel-opposed air headers located near the top of the tank to blow-off parts before entry in the recirculation portion of the dryer. Dimensions: 2 - 26" D x 18" W x 26" L (front/back) 2 - 37" D x 18" W x 26" L 2 - 26" D x 18" W x 26" L 14 - Genesis 4G - 500 - 6 Generators 2 - Automatic Load and Unload Arms US Filter Closed Loop Filtration System -Automatic Material handling w/ dual-headed Crest CTS-1000 AB5 Free standing robot-type transport unit -Robot capacity: 70 lbs / basket -Lift speed is adjustable from 5 - 20 FPM -Baskets - 24" L x 15" W x 18" D (double stack) -Manuals & Schematics -Spare parts/generators More pictures available upon request -Electrical Cabinet: 15" x 73" x 75" 200 lbs -4 Bin Parts Washer: 127" x 46" x 43" 4,000 lbs -2 Bin Parts Dryer: 92.5" x 46" x 43" 4,000 lbs -Rolling Conveyor: 108" x 22" x 30.5" 500 lbs -Rolling Conveyor: 150.5" x 22" x 36" 500 lbs -Load Robot: 20.5" x 16.5" x 78" 1,000 lbs -Un-Load Robot: 20.5" x 16.5" x 78" 1,000 lbs -(2) Robot Guideways: 165" x 29" x 17.5" 2,500 lbs (condensed dimensions) -Generator Station: 44" x 19" 26.5" 500 lbs -Table: 56.5" x 36" x 31" 50 lbs -Crate of Misc.: 39.5" x 31" x 33.5" 250 lbs Note: Box of Tools and Box of Generator stuff to ship inside crate, etc. when ship CHECK WITH WAREHOUSE WHEN SHIPS AS ALOT OF THE ABOVE CAN BE CONDENSED .... TOTAL WEIGHT FOR TRUCKING WILL BE APPROX. 18,000 LBS 40' FLAT BED TRUCK NEEDED!
RETURN
to our home page