EQUIPPED WITH:

Aget's 800 Series cyclone systems are smaller size dust collectors, designed

for a wide range of light, multiple wheel grinding and buffing operations, as

well as single large machines. They are available in ten models; three single

stage cyclone models and seven 2-stage systems. Combining the simplicity and

efficiency of centrifugal precipitation of dust form the air stream, they

provide the user with unmatched operating economy and are virtually

maintenance-free. There are no filter cartridges required, no cartridge

replacement expense.

GRINDING: Surface or cutter grinders: Two machines adjacent to each other. One

surface grinder:10" to 12" wheel. Pedestal grinders:two 8" and 10" wheels.
BUFFING OR POLISHING: "N" or "C" types recommended. Up to two 10" wheels.
WOODWORKING: "C", "T" or "N" types recommended. Saws; 10" to 12", Shapers;

smallest; Jointers; 6" to 8"; Planners; 12" on light duty; 2 smaller machines,

closely grouped on moderate duty.

SPECIFICATIONS:

Inlets ............................................ 5",4",two 4,two 3"
Ratings .................................. 200 To 800 C.P.M. At 5.25" To 2" SP
Recommended Operating Range ....................... 330 To 550 C.F.M.
Pressure Requirements ............................. 5.25"
Dimentions ........................................ H42"xL30"xW22"
Inlet Ht .......................................... 26"
Recirculating Type
Bin Capacity .................................. 3.4 cu ft
Motor
Volts ......................................... 575
HP ............................................ 3/4
RPM ........................................... 3420
HZ ............................................ 60
Phase ......................................... 3
F.O.B.,LOCATION

Gibbs Machinery Company
21500 Hoover Rd Warren MI 48089-3160
Tel: 586-755-5353 Fax: 586-755-0304
Email (Request Quote): sales@gibbsmachinery.com
Web: www.gibbsmachinery.com