Click the link below to view a video of this machine
          
          General Specifications As Per Brochure (Buyers are responsible for confirming
          
          all details below)
          
          Equipped With:
              Iemca Prodigy 551 E short Bar loader
              Mist Collector
              High Pressure Collant System
              Misc Tooling
          
          
          Note: the MB-38SY is a 6-Axis bar machine with an 8-station, 2-axis turret
          
          front side, and an 8-station 3-axis turret rear side, which can operate
          
          simultaneously and independently, driven tool capability on all stations on
          
          rear turret. Plus a heavy duty sub-spindle unit for simultaneous main side,
          
          sub side machining
          
          
          Control:                                    Fanuc LH1
          Simultaneous Control Axis:                  6 (2+4)
          Least Inpur Increment:                      0.0001 in (Diameter for X-Axis)
          Stock diameter:                             1.500"
          Max. machining length:                      4.92"
          Max. drilling dia.:                         .63" in 1045 Steel
          Main Spindle:
              Max. tapping size:                      1/2" in 1045 Steel
              Number of spindle:                      1
              Spindle speed:                          60 to 6,000 Rpm
              Height of Spindle center:               39.37"
              Motor output:                           7.5/11 kW (10/14.7 HP)
              Cutting torque:                         35 N m
              Spindle indexing:                       5 deg (72 div.)
              Chuck type:                             Collet Chuck (Draw / toggle type)
          Turrets:
              Number of turret:                       2
              Number of mountable plane:              8 surfaces, 
                                                      2 tool locations per surface
              Indexing time:                          T1: 0.2 sec/pos. T2: 0.3 sec/pos.
              Idle time (Chip to Chip):               T1: 0 to 1.5 sec T2: 0 to 1.7 sec
              Indexing method:                        Servomotor
              Max. speed of drive axis:               T2 Turret 5,400 Rpm
          Sub Spindle:
              Spindle speed:                          60 to 6,000 Rpm
              Motor output:                           3.7/5.5 kW (5/7.5 HP)
              Cutting torque:                         14 N m
              Spindle indexing(Op.):                  5 deg. (72 div.), C-axis Opt.
              Chuck type:                             Collet Chuck 
                                                      (Push with toggle type)
          Stroke:
              X1,X2:                                  3.15"
              Z1:                                     3.937"
              Z2:                                     5.51"
              Y(T2 turret):                           3.15"
              Z3:                                     11.22"
          Rapid Traverse:
              Z1,Z2:                                  787 Ipm
              X1, X2:                                 472 Ipm
              Z3:                                     787 Ipm
              Y:                                      394 Ipm
          Dimensions (approx) L x W x H:              139" x 81" x 70"
          Weight (Approx.):                           11,500 lbs
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): sue@automatics.com
Web: www.automatics.com