Click the link below to view a video of this machine
https://www.youtube.com/watch?v=9d8rMgiETgg
General Specifications As Per Brochure (Buyers are responsible for confirming
all details below)
Equipped With:
Iemca Boss 547
Chip Conveyor
Mist Collector
Through Sub-Spindle Coolant w solenoid valve & M-Codes
Rigid Cross Tapping, Incudes Custom Macros
Parts Conveyor
Misc Tooling
(5)Single bore
(4)Double bore
(8)Single turning
(1)Double turning
(1)Cutoff
(1)Thread roller
(1)Parts catcher
(1)Live tool
Note: the MB-38SY is a 6-Axis bar machine with an 8-station, 2-axis turret
front side, and an 8-station 3-axis turret rear side, which can operate
simultaneously and independently, driven tool capability on all stations on
rear turret. Plus a heavy duty sub-spindle unit for simultaneous main side,
sub side machining
Control: Fanuc LH1
Simultaneous Control Axis: 6 (2+4)
Least Inpur Increment: 0.0001 in (Diameter for X-Axis)
Stock diameter: 1.500"
Max. machining length: 4.92"
Max. drilling dia.: .63" in 1045 Steel
Main Spindle:
Max. tapping size: 1/2" in 1045 Steel
Number of spindle: 1
Spindle speed: 60 to 6,000 Rpm
Height of Spindle center: 39.37"
Motor output: 7.5/11 kW (10/14.7 HP)
Cutting torque: 35 N m
Spindle indexing: 5 deg (72 div.)
Chuck type: Collet Chuck (Draw / toggle type)
Turrets:
Number of turret: 2
Number of mountable plane: 8 surfaces,
2 tool locations per surface
Indexing time: T1: 0.2 sec/pos. T2: 0.3 sec/pos.
Idle time (Chip to Chip): T1: 0 to 1.5 sec T2: 0 to 1.7 sec
Indexing method: Servomotor
Max. speed of drive axis: T2 Turret 5,400 Rpm
Sub Spindle:
Spindle speed: 60 to 6,000 Rpm
Motor output: 3.7/5.5 kW (5/7.5 HP)
Cutting torque: 14 N m
Spindle indexing(Op.): 5 deg. (72 div.), C-axis Opt.
Chuck type: Collet Chuck
(Push with toggle type)
Stroke:
X1,X2: 3.15"
Z1: 3.937"
Z2: 5.51"
Y(T2 turret): 3.15"
Z3: 11.22"
Rapid Traverse:
Z1,Z2: 787 Ipm
X1, X2: 472 Ipm
Z3: 787 Ipm
Y: 394 Ipm
Dimensions (approx) L x W x H: 139" x 81" x 70"
Weight (Approx.): 11,500 lbs
Subscribe to RSS
