MODEL: LMV-49-DVS

Table Size (W x L/In.) 9 x 49
Spindle Taper R8
Diameter of Quill (In.) 3/8
Number of Spindle Speeds Digital Variable Speed
Range of Spindle Speeds (RPM) 65 - 4,500
Quill Down Feed Rates (IPR) .0015 - .003 - .006
Spindle Quill- Z Travel (In.) 5
Head Movement (Right or Left | Front or Back) 90 | 45
Table Travel - X Logitudinal: 36.6"
Table Travel - Y Cross: 12"
Knee Travel - Vertical: 16"
Ram Travel: 12"
Spindle center to column: 6.75" - 18.5"
Spindle nose to Table top: 2.125 - 18"
Number of T-Slots 3
Size of T-Slots (W x D/In.) 5/8 x 3/4
Distance Between T-Slot Centers (In.) 2-1/2
Floor area: 7 x 6.5 x 6.75' H
Weight: 2100 lbs.

Standard Accessories
One Shot Lube System
Hard-Chromed Ways
Front and Rear Rubber Way Covers
Tool box with tools
Works 220V Single phase .. or 220 or 440 3-phase

This model is equipped with Digital Variable Speed for easy
change of spindle speeds.

The model has many unique features compared with most of the
similar machines on the market. The quill is CNC ground to a
mirror finish and chromed to fit the housing resulting in
close to jig bore accuracy for quill downfeed. Tapered gibs
installed on the ways allows easy adjustment for long term
usage. The feed handles are designed to spin free which
eliminates the friction between the operator's hand and the
feed handle. The bottom of the saddle, instead of the top of
the knee ways, which rides on the knee is hand scraped for
better oil retention and prevent dirt and chips from
embedded in the knee ways.


Digital Variable Speed Head
Easy speed change. Just turn the knob
Machine works on Single Phase or 3 phase motor
Low voltage control
Safety feature includes preventing self-start after

power failure of E stop

Improved design of Backlash Eliminator
Backlash Eliminator By Double Nut Design replaces the older
design that squeezes a split nut to get rid of backlash.
Sharp is the first one to use a double nut design that keeps
the feed screw in contact with a pair of bronze nuts. Using
a custom tool supplied with the mill, the feed nuts are
adjusted to control backlash and held tight with a retaining
nut and locking ring.

Patented Knuckle Head design
The New Patented Knuckled-Head Design prevents the head from
slipping. The Sharp mills have a knuckle which uses 6 bolts,
3 each side, fitted into circular T-slots with matching nuts
securing them from the outside. It locks the head in place
for better accuracy and performance than the old design
using only 3 bolts to squeeze the casting to hold the head
without the T-slots. (Patent No. 5044054)

Better motor shaft support
Roller Bearing Support at the bottom of the motor shaft
ensures proper loading, support and alignment of the
spindle. It also prevents the distortion of the belts due to
tension from long years of milling operation

Crank Handle Improvements
Thrust Bearings mounted at the end of the table and saddle
pre-load the feed screw, eliminating end play for precisely
controlled lateral movements.

Scott Machinery Inc
4700 Lang Ave, Suite D McClellan CA 95652-6215
Tel: 916-638-7718 Fax: 916-638-2450
Email (Request Quote): sales@scottmachinery.com
Web: www.scottmachinery.com