ONE - USED HYD-MECH SEMI- AUTOMATIC VERTICAL BANDSAW
MODEL: VW-18 ♦ YEAR: 2014
Stock No. 9838

Specifications
Capacity @ 90 deg:22” x 18” or 17-1/2” round @ 3 degree canted: 20-3/4” x 18” or 17-1/2” round
Capacity @ 45 deg:15” x 18” or 12-1/2” round @ 3 degree canted: 14” x 18” or 12-1/2” round
Capacity @ 60 deg:10-1/4” x 18” or 10-1/4” round @ 3 degree canted: 9-1/2” x 18” or 9-1/2” round
Max tilt to right:60 degrees
Max tilit to left:60 degrees
Head tilt (manual/powered):Powered
Degree of canted head:0 degrees – 3 degrees variable
Throat depth:18”
Throat height:22”
Blade speeds:65-385 SFM
Number of blade speeds:Infinite
Blade dimensions:1-1/4” x 16’3” x .042”
Blade guides:Carbide
Guide arm (manual/powered):Manual
Blade drive type:Motor to gearbox
Feed pressure:Variable
Blade tension:Manual
Feed rate:Variable
Coolant type:Mist or Flood
Coolant tank capacity:12 gallons
Motor horsepower:5 HP
Currently wired:440 volt
Wheel diameter:19”
Number of wheels:2
Working height:36-1/2”
Number of vises:2
Vise type (hydraulic/manual):Hydraulic
Operation:Semi-Automatic
Dimensions:36” x 95” x 96”
Weight:3,000 lbs

Equipped with:
•Hydraulic overhead bundling clamp
•Power head tilt to 60 degrees in both directions
•Variable canted head 0 degrees – 3 degrees
•Variable vise pressure
•2 table vises
•Tall square vise inserts
•Mist lubrication
•Powered blade chip brush

Westbrook Engineering Co Inc
23501 Mound Rd Warren MI 48091-2048
Tel: 866-FOR-SAWS Fax: 586-759-3106
Email (Request Quote): info@westbrook-eng.com
Web: www.westbrook-eng.com