To the best of our knowledge all details listed below are deemed correct. 
          It is the buyer's responsibility to confirmed prior to purchase.
          
          Equipped With:
            FMB 5-55/3800 12' Magazine Bar Feed 
           =Approx Tooling
           =  (1) of Biglia T134-00059 Toolholder
           =  (2) of MT 10.57.60.00 Radial Static Tool
           =  (2) of Low Profile Radial Static Tool
           =  (2) of MT 10.88.14.01 Sub Spindle Turning Toolholder
           =  (1) of Algra T134-00061 Live Radial Toolholder
           =  (2) of Static Endworking Holder
           =  (1) of 42mm Sub Spindle Collet Chuck
           =  (1) of 60mm Main Spindle Collet Chuck
          
          
          
          General Specifications As Per Brochure (Please Verify Details):
          
          Number of Axes:                                8
          
          Bar Capacity:                                  2"
          
          Machining Diameter:                            9.6"
          Swing Over Diameter:                           20"
          
          Main Spindle
          Spindle Speed:                                 5,000 RPM
          Spindle Nose:                                  5"
          Spindle Bore:                                  2.17"
          Chuck Diameter:                                8"
          Motor Power:                                   20 HP
          C-Axis Least Input Value:                      0.001 Deg.
          
          Sub Spindle
          Spindle Speed:                                 5,000 RPM
          Spindle Nose:                                  5"
          Spindle Bore:                                  2.17"
          Chuck Diameter:                                6.5"
          Motor Power:                                   15 HP
          C-Axis Least Input Value:                      0.001 Deg.
          Clear Shift Travel:                            4.72"
          
          Upper Turret
          Number of Stations:                            12
          Number of Static Tools:                        96
          Turret Indexing:                               0.10
          Number of Live Tools:                          24
          Live Tool Speeds:                              4,000 - 60,000 RPM
          Motor Power (30 Min Rating):                   5 Geared
          
          Lower Turret
          Number of Stations:                            12
          Number of Static Tools:                        96
          Turret Indexing:                               0.10
          Number of Live Tools:                          24
          Live Tool Speeds:                              4,000 - 60,000 RPM
          Motor Power:                                   5 Geared
          
          Cooling System Tank Capacity:                  120 Gallons
          
          Machine Dimensions:                            173" x 85" x 89"
          Machine Weight:                                15,855
          
          Equipped With:
            Fanuc 31iT CNC Control, 8-axis (to be confirmed)
            Spindle option for 2" cap
            Spindle liner
            FMB Turbo 5-55 Magazine Bar Loader (set up for 2" cap); w/ remnant retract
            Full Length Vari-Speed Parts Conveyor w/90 degree exit conveyor
            Dual Turrets
            Coolant-thru-the-turret option
            (2) Renishaw Tool Setting Probes
            Y-Axis on Upper/Lower Turret
            Sub Spindle
            Main & Sub Spindle Collet Chucks
            3-High flow coolant pumps
            CoolBlaster Dual High Pressure Coolant System w/ Filter (1/turret)
            Accu Chiller Coolant Refrigeration System w/ Filter
            Combination Chip Conveyor/Coolant-chip tank 
            approx list of Tooling (to be confirmed)
            (13) OD turning tools
            (2)  2-position ID Tool Holders
            (2)  4-position ID Tool Holder
            (6)  1-position ID Tool Holder
            (6)  1-position Rotary X-axis Mill-Drill Tool Holders
            (4)  Adjustable Z-axis Live Angle Tool 
            (4)  Z-Axis Rotary Tools
            (3)  2-Position X-Axis Mill/Drill Tools
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): sue@automatics.com
Web: www.automatics.com