"To the best of our knowledge all details listed below are deemed correct. It
          
          is the buyer's responsibility to confirm all details and we encourage an
          
          inspection of the machine(s) and accessories prior to purchase."          
          ============
          
          
          Equipped With:
            8-Axis Mill / Turn Center with a true linear "Y"-Axis 
            Dual 16-Station Live Tool Turrets with 32-Driven Tool Stations
            Finished Parts Pick-Off Unit with Parts Conveyor, Barloader Interface
            Headwall air blast and coolant outlets for main, subspindle & thru turret
            Dual 4-amp coolant pumps with coolant flow sensor monitoring for driven tool
          
            turrets
            Dual coolant pumps for external coolant, chip flushing and chip washdown 
            Dead-Length collet chuck on Main & Sub
          
            for each spindle
            Chip Conveyor (42" Barrel height with air-curtain lean-off)
            BMT-65 Toolholders 
          
          
          Approximately 25-STATIC BMT-65 TOOLHOLDERS INCLUDED WITH EACH MACHINE
          
          Available: list of tool holders in the machine turrets that are extra to the
          
          ones in the picture on the table:
          13 pcs. 1-1/4 ID tool holders
          14 pcs. OD tool holders
           4 Radial Live Tools
           4 Axial Live Tools
          11 Metric tool holders
          
          Bar loader has a 2'' pusher with 6 collets
          1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-9/16, 1-3/4
          
          
          ================
          
          OEM Specifications
          
          CAPACITY
          Turning diameter:                    7.48" (190mm) maximum,6.7" (170mm)
          
          Turning length/Center distance:      15.75" (400mm)/36.22" (920mm) between
          
                                               Centers
          
          MAIN SPINDLE / SUBSPINDLE
          Spindle nose / Bearing Diameter:     A2-5
          Spindle Bar Capacity:                2.0" (51mm)
          Chuck Size:                          6"
          Spindle Center Height:               46.45" (1,180mm)
          Maximum spindle speed:               6,000 RPM Integral (4,000 RPM Hi Torque)
          
          Spindle motor horsepower:            20 HP Peak, 15 HP (30 Min. Duty Rating)
          
          LIVE TOOL TURRETS
          Number of turret stations:           32
          Index time 
          (adjacent tool/180 Deg. Index):      0.2 Seconds/1.2 Seconds High Speed
          Live Tool Power / RPM:               7 HP/ 6,000 RPM, 14.75 ft lbs. (20Nm)
          Tool Size:                           25mm (for square tool and round tool)
          
          Collet Size:                         ER-32 Tool Holder Type & Size:BMT-65
          
          Base Mount Tooling
          Turret Thru-The-Tool-Coolant:        Rated to 1,000 PSI for High Pressure Cool 
          "Y" AXIS
          Y axis travel:                       2.75" of travel-1.378" off of Y Axis Y
          
          axis Rapid Feed Rate:                236 IPM (6m per minute)
          
          "C" AXIS
          Spindle Radial Resolution:           360,000 Radial Positions w/ Contouring
          
          "B" AXIS (sub spindle travel)
          Distance Between Spindles:           36" (914mm)
          B Axis Rapid Traverse Rate:          1,573 IPM (40m per minute)
          B Axis Travel:                       25.59" (650mm)
          
          AXIS SPECIFICATIONS
          Axis Travel-X1, X2- Axis:            5.9" (150mm)/9.05" (230mm)
          Axis Travel-Z1, Z2- Axis:            17.32" (440mm)/17.32 (440mm)
          Rapid Travers Rate-X1, X2 -Axis:     630 IPM (16m/minute)
          Rapid Travers Rate-Z1, Z2 - Axis:    1,574 IPM (40m/minute)
          Minimum Programmable Input:          0.0001" (0.001mm = 40 millionths inch)
          
          FLUID CAPACITY
          Hydraulic System:                    10.5 Gal. (40 Liters)/3 HP (2.2kw) Motor
          Coolant Pumps - Dual Coolant Pumps:  (2) 1.7 HP Pumps for Tooling/Chip Flush
          Coolant Tank:                        70 Gallon (280 Liters)
          Machine Weight:                      22,751 lbs (10,320 kg)
          Electrical Requirement:              49.5 KVA (220VAC +5%, 3 Phase,60hz,131amp
          Air Requirement:                     85 PSI @ 8-cfm for parts catcher, ejector
          Machine Dimensions:                  165" x 88" x 84"
          
          MACHINE OPTIONS
          
          
          Automatic operator door - installed (pneumatic control):          $6,995.00
          6" Hydraulic Chuck:                                               $2,995.00
          Renishaw Tool Setter - Plug-in style Tool Setter - installed:     $7,995.00
          Voltage Stabilizers & Transformers (Specify voltage):             P.O.R
          FIRETRACE Fire suppression system - installed:                    $7,495.00
            See Fire Waiver in Ganesh Terms and Conditions
          Mistbuster-850 Mist Oil Filtration System 
          Coolant oil chiller unit - (36,000 BTU's) to control coolant 
          MP-Systems High Pressure Coolant System 
          
          Additional tooling & accessories available .... PRICE ON REQUEST
          
          Rigging, shipping, installation and training quoted separatley
          
          
          Service and Parts available from Exspand Machinery, Chatsworth Ca
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): steve@automatics.com
Web: www.automatics.com