To the best of our knowledge all details listed below are deemed correct.
          It is the buyers responsibility to confirm ALL details prior to purchase.
           
          Option: These new machines are being sold as-is with pre-installation checkout
          in Chatsworth, Califonia. Parts Warranty Only Starting at: $10,000.00
          
          Equipped With:
             Heavy Duty Cross Roller Bearing Ways
             Dual Ground, Dual Contact "Big Plus" 12,000 RPM Spindle
             21-Tool, High Speed Tool Changer
             2,362 IPM Rapid Traverse Rates
             32-GB High Speed Data Server for Massive Prgram Memory
             High Speed Synchronous Rigid Tapping
             45 PSI Coolant System for Cutting Tools
             Chip Wash Down Coolant Flushing System
             Air Gun & Coolant Gun
             Full Machine Enclosure Including Top Cover
             Spindle Air Blast by M-Code for Through Spindle & at the Cutting Tool
             Portable MPG Hand Wheel with Magnetic Base
             LED Worklight
             Heat Exchanger for Electrical Cabinet
             Machine Condition Signal Lamp - Tri-Color Stack Lamp
             Automatic Pressurized Centalized Lubrication System
             4th Axis Wiring Pre-Installed
             M30 Automatic Power-Off Turn Off the Circut Breaker
          
          **The Mitsubishi control, motors, and drive package are covered by a 3-year
          
          warranty. The Machine Has a One-Year Warranty**
          
          Axis Travel
             X-Axis:                                20.08"        510mm
             Y-Axis:                                16.93"        430mm
             Z-Axis:                                12.99"        330mm
             Spindle Nose To Table Surface:         5.1"-18.1"    130-460mm
             Spindle Centerline To Column:          18.89"        480mm
          
          Work Table
             Table Surface Dimension (X/Y):         22.04" x 15.75"560 x 400mm
             T-Slot Dimension/Spacing:              3-14mm Slots  125mm Spacing
             Table Height:                          35" Above Floor890mm
             Table Weight for Accuracy:             550 lbs       250 KG
          
          Spindle
             Spindle Motor:                         Mitsubishi DJ-D5.5/120-01 - 7.5 HP
             Spindle Motor Coupling:                Inline Direct Drive
          
             Spindle Speed:                         12,000 RPM
          
             Synchronous Tapping Speed Limit:       6,000 RPM
             Tapping Performance:                   M20 x 2.5 AluminumM14x2.0 Steel 
             Drilling Performance:                  38mm Aluminum 25mm Steel
             Spindle Torque:                        26 ft-lb @ 1500 RPM
             Tool Type:                             BT#30         4 Bearing Spindle
                                                                  2 Top - 2 Bottom
             Spindle Bearing - Inner Diameter:      40mm          P4 Class
                                                                  7 Steel Ball Bearings
             Spindle Material / Hardness:           SCM415        HRC 58-62
             Retention System / Holding:            MAS-P30T-1    Bellville Spring Stack
          
                                                                  1650-1760 lbs
          
             Spindle Runout:                        <0.000040" TIR / Pull Stud USST B30-4500H
          
          
          Axis Feeds (X/Y/Z)
             Rapid Traverse:                        2,362 IPM     60/60/60m/minute
             Rated Cutting Feedrate:                0.04 - 1181 IPM30/30/30m/minute
          
             Mechanical Way System:                 Roller Bearing WaysRoller Ways 30/30/35mm
          
             Axis Drive Motor Power:                2 HP /3 HP    1.5 kw/2.2 kw w/ Brake
          
             Axis Thrust Force:                     3,335lbs/3,692lbs14840 N/16430 N
             Ballscrews:                            32mm          16mm Pitch
          
             Positioning Accuracy:                  +0.00015"     +0.004mm
          
             Positioning Reapeatability:            +0.00008"     +0.002mm
             Least Input Command Increment:         0.0001" / 0.000040"0.001mm 40 Millionths
          
          
          Tool Changer
             Tool Capacity:                         21-Tools      Drum turret
             Tool Shank:                            BT#30         MAS P30T-1 Pull Stud
             Tool Change Time:                      1.6 Sec       Servo Motor Driven
             Tool Diameter with Adjacent Tool:      2.36"/3.15"   60mm/80mm w/No Tool
             Tool Length / Max. Tool Weight:        7.87"/6.6 lbs 200mm/ 3 kg
             Tool Selection / Tool Access:          Random        Bi-Directional
          
          General
             Air Service Requirements:              85 psi @ 5 scfm6 kg/cm2
             Electrical Requirements:               16kva, 40 Apms22vac+5%, 60hz 
             Coolant Pump - Chip Flush Pump:        1.0 HP        .75kw
             Cutting Tools - HP / Pressure:         1.0 HP / 45 PSI.75kw
             Coolant Tank Capacity:                 32 Gallons    120 Liters
             Machine Dimesnions:                    50"x87"x95"   125x221x241 cm
             Machine Weight:                        6,110 lbs     2,770 kg
          
          Genmill T-500 Machine Options
             Factory machine installation: "Peace-of-Mind Factory Installation"
          *Includes Expenses*:                                    POR
          
          
             Factory on-site 3-day machine operation and program training
          
          *Includes Expenses*:                                    POR
          
          
             Automatic Operator Door:                             POR
          
             Belt-Style Rear Discharge Chip Conveyor:             POR
          
             Auger-Style Chip Conveyor:                           POR
          
             15,000 RPM Spindle Speed Upgrade:                    POR
          
             Second-Year Machine Warranty:                        POR
          
             Voltage Stabilizers and Transformers 
          (specify voltage needs):                                POR
          
             Air Conditioner for Electrical Cabinet 
          Refrigerated-Style,Upgrade Over Standard Heat Exchanger:POR
          
          
             375 PSI Through-The-Spindle-Coolant Prep:            POR
          
          
             375 PSI Through-The-Spindle-Coolant Upgrade 
          (25-Bar - No Additional Coolant Tank Supplied:          POR
          
          
             Linear Scales For All 3-Axis
          Heidenhain5um Optical Liner Scales:                    POR
          
          
          

Automatics & Machinery Co Inc
150 Martin St Longmont CO 80501-5939
Tel: 800-543-7666 Fax: 303-651-6556
Email (Request Quote): steve@automatics.com
Web: www.automatics.com