SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS
FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:
One used 2005 DMG DECKEL MAHO DMU80T 5-AXIS Universal Machining Center:

Made in Pfronten, Germany

New spindle installed by DMG, less than 10 hours on the new spindle

Heidenhain iTNC530 CNC control with 15" TFT screen & Electronic Handwheel

-MAXIMUM WORKPIECE SIZE-
34.6" (880 mm) diameter x 30.7" (780 mm) height x 1,543 lbs (700 kg)

-WORK AREA-
Traverse path X (longitudinal).......................... 34.6" (880 mm)
Traverse path Y (across)................................ 24.8" (630 mm)
Traverse path Z (vertical).............................. 24.8" (630 mm)

-FEED DRIVES-
Type.............................................. Brushless AC/Digital
Rapid traverse linear axes X/Y/Z.................. 1,181 ipm (30 m/min)
Ballscrews X/Y/Z...................... 50 x 20 mm/50 x 20 mm/63 x 20 mm

-TOOL MAGAZINE-
Application................................................... Vertical
Type of Gripper................................................ Pick Up
Number of Tool Stations............................................. 32
Max Tool Weight........................................ 17.6 lbs (8 kg)
Max Tool Diameter without free side pockets.............. 3.15" (80 mm)
Max Tool Diameter with free side pockets................ 5.12" (130 mm)
Max Tool Length......................................... 12.4" (315 mm)

-HEIDENHAIN GLASS SCALES X/Y/Z AXES DIRECT PATH MEASURING SYSTEM-
Input Resolution.............................................. 0.001 mm

-HEIDENHAIN ROTARY ENCODERS B/C AXES DIRECT PATH MEASURING SYSTEM-
Input Resolution.............................................. 0.001 mm

-EQUIPPED WITH-
Fully enclosed protection cabin

Integrated Rotary Table
Table Clamping Surface.................... 27.6" (700 mm) Diameter
Maximum Load Table Center...................... 1,102 lbs (500 kg)
Rigid Table Clamping Surface.... 49.2" x 27.6" (1,250 mm x 700 mm)
Rigid Table maximum load....................... 1,543 lbs (700 kg)

18,000 RPM Motor Spindle with Active Cooling
Type of Main Drive............................................. AC
Drive Power 100% DC............................... 25.5 HP (19 kW)
Drive Power 40% DC................................ 37.5 HP (28 kW)
Max Spindle Torque 100% DC.................... 60.5 Ft/Lb. (82 Nm)
Max Spindle Torque 40% DC.................... 89.2 Ft/Lb. (121 Nm)
Speed Range......................................... 20-18,000 RPM
Acceleration from 0-18,000 RPM........................ 4.5 Seconds
Number of gear steps......................................... None
Spindle Taper.............................................. CAT 40
Spindle bearing diameter front/rear........ 3.15"/2.36" (80/60 mm)

103 degree NC-Controlled Swivel Milling Head (B-Axis) with Active Cooling
Swivel Range (0 is Vertical/-90 is Horizontal) +12/-91 Degrees (103 total)

BLUM Laser tool measuring tool length, diameter & broken tool detection

Heidenhain infrared parts measuring probe

Air blast thru spindle centre
Air blast on outside of spindle

Chip auger

External flood coolant on outside of spindle
1 bar (14.5 PSI) pressure, 40L/Min (10.6 gallon/min) flow rate
250L (66 gallon) capacity coolant tank

Spindle chiller on outside of machine

Price quoted in United States Dollars

This is a temporary description subject to change and amplification.

APPROXIMATE WEIGHT 19140#

Y Franke & Company LLC
N112 W16298 Mequon Rd #347 Germantown WI 53022
Tel: 847-987-1607 Fax:
Email (Request Quote): york@yfranke.com
Web: www.yfranke.com