Drilling capacity: steel 2 1/4"

cast iron 2-5/8"

Tapping capacity: steel 2"

cast iron 2-3/8"

Boring capacity: steel 5"

cast iron 7-3/8"

Column diameter 15-3/8"

Minimum/Maximum distance, face of column to 14-9/16" ~ 63"

centerline of spindle 22-1/4" ~ 70"

Minimum/Maximum distance, column center to 17-1/8" ~ 61"

Height of base 9-1/16"

Height of column 117-3/4"

Maximum height from spindle head to floor 131"

Vertical travel of spindle in head 11-3/4"

Taper in spindle #5 Morse

Spindle diameter 3-1/8"

Quill diameter 4-1/8"

Vertical traverse of arm on column 32-7/8"

Horizontal traverse of head on arm 48-7/16"

(12) Spindle speeds 30 ~ 1,580 RPM

(12) Feeds .0025 ~ .045 IPR

Maximum height over column cap 117"

Equipped with:36" Wide x 19-7/8" Deep x 19-3/4" High t-slotted

box table

Hydraulically actuated pre-selection of next spindle speed while

spindle is running

Hydraulically actuated clamping of arm on column and head on arm

Motorized raising/lowering of arm on column

Automatic tool ejector

Self-contained coolant system with 1/8 H.P. pump motor

1 H.P. hydraulic pump motor

2 H.P. arm elevation motor

7.5 H.P. 3/60/220-440 volt spindle drive motor and electrical

controls

Machine is wired for 220 volt operation.

Approximate Weight: 8,000 Lbs.

Approximate Shipping Dimensions: 94" L-R x 38" F-B x 122" H

Condition: Very Good

(F.O.B. Truck, Hauppauge - Long Island, NY)

Machine Tool & Repair Sales
1537 Lincoln Ave Holbrook NY 11741-2263
Tel: 631-580-2550 Fax: 631-580-2343
Email (Request Quote): sales@machineryselection.com
Web: www.machineryselection.com