*** Tube Mill Setup ***

Wire Feeder, AT-400-360PPR
*** Kit, Zinc Wire, Wire Feeder Setup ***
Feeder Built with:
Drive Roll, 14 Ga., U-Groove
Drive, 14 Ga. VK-Groove
Guide, Wire, Cntr, 11/14 Ga.
Guide, Wire, Inlet, Coax 14/11
Guide, Wire, 14 Ga., Extension Gun
Liner, Nylon, Black, .125 ID x .250 OD

Power Supply, AT-430, 50/60Hz, 380/460V
Kit, Capacitor Bank with Disconnect
AT-400 Power Supply, Added to Improve Low Amperage
Performance on Tube and Extrusion Mills Down to 50 Amps

Gun, AT-400 Ext. 24" Straight Cable, Coaxial, AT-400, 4 Ft
Shorter Length Recommended to Prevent Wire Feeding Issues

Hose, Atomizing, AT-400, 4 Ft.
Switch Box Assembly, AT-400, 20 Ft.

Cable, Power, 4/0, AT-400, Positive, 15 Ft.
Cable, Power, 4/0, AT-400, Negative, 15 Ft.
Cable, Control, Power Supply, 15 Ft.

*** Pay Off Pack ***
Cone, Payoff Pack, Orbital Arm for 20.4", 500 Lb. Barrels
*** Pay Off Pack to Include the Following ***
Fitting Quick Disconnect, 1/4" NPT (4)
Fitting, Payoff Pack Adapter Inlet (2)
Fitting, Quick Connect, Male, Threaded (4)
Liner, 0.300" ID x 0.460 OD x 50 Ft. Green (1)
Mount, AT400 Extension

Bass Machinery
2100 Hendon St Toledo OH 43606-4543
Tel: 419-243-2277 Fax: 330-299-0520
Email (Request Quote): sales@bassmachinery.com
Web: www.bassmachinery.com