DMG MORI NLX-2000SY/500 5-AXIS TURNING CENTER

Specifications:
SWING OVER BED .................................... 25"
SWING OVER CROSS SLIDE ............................ 29.7"
MAX TURNING DIAMETER .............................. 14"
MAX TURNING LENGTH ................................ 20"
BAR WORK CAPACITY ................................. 2.5"
X-AXIS TRAVEL ..................................... 10.2"
Z-AXIS TRAVEL ..................................... 23.2"
Y-AXIS TRAVEL ..................................... 3.9" +- 2.0
MAX SPINDLE SPEED ...................... 5,000 / 6,000 RPM
TYPE OF SPINDLE NOSE ................... JIS-6 / JIS-5
NUMBER OF TOOL STATIONS ........................... 12
SHANK HEIGHT FOR SQUARE TOOL ...................... 1"
MAX ROTARY TOOL SPINDLE SPEED ..................... 10,000 RPM
RAPID TRAVERSE X/Y/Z .............................. 1,181/393.7/400-C IPM
SPINDLE DRIVE MOTOR ............................... 20-HP 1ST, 15-HP,2ND
ROTARY TOOL SPINDLE DRIVE MOTOR ................... 7.5 HP
vOLTAGE ........................................... 220/60 HZ
MACHINE DIMENSIONS ...................... 140.2" X 82" X 84.4"
MACHINE WEIGHT .......................... 12,100 LBS

EQUIPPED WITH:
> CELOS MITSUBISHI M-730UM ERGONLINE TOUCH
> 8" / 6" KITAGAWA HYDRAULIC CHUCK
> RIGID TAPPING, SPINDLE AIR BLAST,
> RIGHT SIDE CHIP DISPOSAL CHIP CONVEYOR HINGE TYPE
> COOLANT SYSTEM 350/550 W, COOLANT GUN
> IN-MACHINE TOO PRESETTER MANUAL UP/DOWN
> BAR FEEDER INTERFACE, 6GB USER MEMORY,
> (2) O.D. MILLING ROTARY TOOL HOLDER, (2) FACE MILLING ROTARY

Pride Machinery Sales Inc
1002 Grand Blvd Deer Park NY 11729-5710
Tel: 631-586-5252 Fax: 631-586-3612
Email (Request Quote): sales@pridemach.com
Web: www.pridemach.com