MAXIMUM SWING: 18.5"
MAXIMUM SWING OVER CARRIAGE: 11.42"
MAXIMUM CUTTING DIAMETER: CHUCKING: 18.5"
MAXIMUM CUTTING LENGTH: 29.72"

MAIN SPINDLE SPECIFICATIONS (L):
SPINDLE NOSE: A2-5
SPINDLE BORE: 2.4"
MAXIMUM BAR DIAMETER: 2" OPTION
SPINDLE SPEED/RANGES: (5,600 W/2.0" OPT)
SPINDLE INDEX (PROGRAMMABLE): 0.001 DEGREE/360,000 POSITIONS
SPINDLE HORSEPOWER (CONT./25% ED): 7.5/10 H.P. (A.C.)
SPINDLE TORQUE: 119 FT./LBS.

SECOND SPINDLE SPECIFICATIONS (R):
SPINDLE NOSE: A2-5
SPINDLE BORE/MAXIMUM BAR WORK: 2.04"/1.65"
SPINDLE SPEED/RANGES: 6,000 RPM/1
SPINDLE INDEX (PROGRAMMABLE): 0.001 DEGREE (NO C-AXIS)
SPINDLE HORSEPOWER (CONT/25% ED): 5/10 H.P. (A.C.)
SPINDLE TORQUE: 58 FT./LBS.

TURRET AND TOOLING SPECIFICATIONS:
TYPE OF TURRET: 1 POSITION, W/ATC
TOOL SHANK HEIGHT: 3/4"
TOOL SIZE (BORING BAR MAX. DIA.): 1.25"
MAGAZINE CAPACITY: 40 TOOLS
TOOL SELECTION METHOD: RANDOM
TOOL TO TOOL ATC TIME: 1.1 SEC.
MAX. TOOL DIA. W/ALL POCKETS FULL: 2.76"
MAX. TOOL DIA. W/ADJ. POCKETS EMPTY: 3.54"
MAX. TOOL LENGTH (FROM GAGE-LINE): 7.87"
MAXIMUM TOOL WEIGHT: 8.8 LBS.
**ATC TOOL SHANK: KM63 (KM63 STANDARD BUT MUST BE VERIFIED BY BUYER)

ROTARY TOOL SPINDLE SPEED/RANGES: 10,000 RPM/1
ROTARY TOOL SPINDLE HP (CONT/20% ED): 3/7.5 H.P. (A.C.)
ROTARY TOOL TORQUE: 36 FT./LBS.
MAXIMUM FACE MILL: 3"
MAXIMUM END MILL: 1"
MAXIMUM DRILL: 1"
MAXIMUM TAP: 5/8 UNC

AXIS TRAVELS:
B-AXIS2: 25 DEG./0.001 DEG. INCREMENTS
Y-AXIS: +/- 2.36"
X-AXIS: 14.17"
Z-AXIS: 30.87"
SECOND HEADSTOCK Z2-AXIS: 29.75"

AXIS RAPID RATES:
Y-AXIS: 1024 IPM
X-AXIS: 1181 IPM
Z-AXIS: 1299 IPM
SECOND HEADSTOCK Z2-AXIS: 1181 IPM
C-AXIS: 400 RPM
B-AXIS: 74 RPM
MACHINE:
FLOOR SPACE (WXL): 81.9" X 122"
MACHINE HEIGHT: 91.3"
TOTAL POWER REQUIRED (MACHINE ONLY): 19.1 KVA
NOTE: ACTUAL MACHINE MAIN TRANSFORMER KVA RATING WILL BE GREATER.
AIR REQUIREMENTS: 72 PSI/14 CFM
MACHINE WEIGHT: 10,803 LBS.
MAZATROL PC-FUSION-CNC 640MT CONTROL
EIA/ISO OPTION PACKAGE (FOR INTEGREX WITHB AXIS)
B-AXIS 0.001 DEGREE INCR. N/A CONTOURING
6” THRU-HOLE CHUCK BB-06 FOR 2” BAR CAPACITY
6” KITAGAWA CHUCK ON SUB-SPINDLE
PCMCIA INTERFACE (2-SLOT)
3.5” FLOPPY DISK DRIVE
2 GB HARD DRIVE
40 TOOL MAGAZINE
CHIP CONVEYOR REAR DISPOSAL (HINGE TYPE)
MILLING-SPINDLE SYNCHRONOUS TAPPING
CYLINDRICAL INTERPOLATION
2ND SPINDLE POSITIONING 0.001 DEG W/O C-AXIS

Machinery Resources Int'l Inc
1650 Voyager Ave Simi Valley CA 93063
Tel: 877-568-2121 Fax: 818-346-7986
Email (Request Quote): inquiries@machineryresources.com
Web: www.machineryresources.com