MAXIMUM BAR DIAMETER: .750 INCHES
LINEAR BALL WAYS: ALL
“T” AXIS BRAKE:
HORIZONTAL BED: IMPROVED THERMAL CHARACTERISTICS
FORCED LUBRICATION SYSTEM: EXTENDED SERVICE LIFE
ROUNDNESS: TO 1 UM
SUB-SPINDLE: BY “M” CODE
MAIN/SUB SPINDLE PHASE SYNCHRONIZATION
Z AXIS TRAVEL – FIXED GUIDE BUSHING: 8.26 INCHES
-CHUCKER MODEL: 1.77 INCHES
-DRIVEN GUIDE BUSHING: 6.69 INCHES
SPEED RANGE OF MAIN SPINDLE 5HP
SPINDLE CENTER HEIGHT 37.5 INCHES
SPINDLE INDEXING INCREMENT: 1 DEG.
NUMBER OF TOOL STATIONS:
5 O.D. TOOLS
3 CROSS DRIVEN TOOLS
4 I.D. TOOLS
8 BACK WORKING TOOLS
SPEED RANGE OF SUB-SPINDLE: VARIABLE: 200 TO 12000 RPM
PROGRAMMABLE SERVO AXIS DESIGNATIONS:
“Z” MAIN HEADSTOCK IN AND OUT: 8.26 INCHES
“T1” O.D. TOOL SLIDE UP AND DOWN: 5.09 INCHES
“X” O.D. TOOL SLIDE RIGHT TO LEFT: 1.65 INCHES
MAIN SPINDLE THROUGH HOLE DIA.: 22.5 MM
SUB SPINDLE THROUGH HOLE DIA.: 20.5MM
PAINT: URETHANE
SUB SPINDLE: PRESSURIZED FOR OIL COOLANT
OIL MIST LUBRICATION: FOR OIL COOLANT
ROTARY GUIDE BUSHING UNIT: FOR OIL COOLANT
WEIGHT: 4000 LBS
FLOOR SPACE (L X H X W): 61” X 45” X 67”
STANDARD CONTROL FEATURES:
FANUC 31IT CONTROL
MANUAL PULSE GENERATOR
PROGRAM CHECK FUNCTION VIA MANUAL PULSE GENERATOR
BE-ABLE PRO PROGRAMMING SOFTWARE
LINEAR AND CIRCULAR INTERPOLATION
AXIS DESIGNATIONS (X,Z,A,X2,Z2,T)
LEAST INPUT INCREMENT: 0.00004
LINEAR AND CIRCULAR INTERPOLATION (X/Y/Z)
RAPID TRAVERSE RATE (X1 472 IPM): 708 IPM
FEED RATE OVERRIDE 0% - 150% IN 10% INCREMENTS
ABSOLUTE/INCREMENTAL COMMANDS
OFFSET AMOUNT: +/- 6 DIGITS
NUMBER OF OFFSETS: 64 PAIRS
BACKLASH COMPENSATION: 0 TO 255 UM
7.2” MONOCHROME LCD
NUMBER OF REGISTERABLE PROGRAMS: 63
SPINDLE SPEED: 5 DIGIT S CODE
TOOL FUNCTION: 4 DIGIT T CODE
CIRCULAR RADIUS DESIGNATION (R)
EXACT STOP CHECK
OPTIONAL STOP
WORK COORDINATE SETTING
DECIMAL POINT INPUT
OPTIONAL BLOCK SKIP
SEQUENCE NUMBER SEARCH
PROGRAM NUMBER SEARCH
STORED STROKE LIMIT
AUTOMATIC X-AXIS MIRROR IMAGE
THREAD CHASING FUNCTION
RS-232C I/O INTERFACE
PCMCIA SLOT
10 BASE-T ETHERNET PORT
RUN HOUR AND PARTS COUNTER DISPLAY
CONSTANT SURFACE SPEED CONTROL
TOOL NOSE RADIUS COMPENSATION
AUTOMATIC CORNER ROUNDING AND CHAMFERING
G10 PROGRAMMABLE DATA INPUT
BACKGROUND EDITING
MULTIPLE EDITING CYCLES
CANNED CYCLE FOR DRILLING
TOOL GEOMETRY AND WEAR COMPENSATION
RIGID TAPPING – MAIN AND SUP SPINDLES
80 METERS PROGRAM STORAGE AND EDIT
SYSTEM FOR SPINDLE COLLET ACTUATION
AUTOMATIC FLOOD COOLANT SYSTEM
ALL MOTORS AND CONTROLS FOR 200 VOLTS
WRENCHES, SERVICE MANUALS AND INSPECTION SHEETS
AUTOMATIC LUBRICATION SYSTEM
WORK LIGHT
TOTALLY ENCLOSED WORK AREA
DRIVEN/FREE ROTATING AND STATIONARY GUIDE BUSHING ASSEMBLIES
PARTS CATCHER
THREADING UNDER CNC
COOLANT FLOW SWITCH
SET OF STANDARD TOOLS FOR MACHINE SETUP (CUTTING TOOLS NOT INCLUDED)
DOOR INTERLOCKS
DRIVEN CROSS SPINDLES FOR (1) ER16 AND (2) ER11 COLLETS
(3) I.D. DRILL ADAPTERS FOR ER 11 COLLETS
(4) BACK ID DRILL ADAPTERS
BUILT-IN TYPE SUB SPINDLE MOTOR
FRONT EJECTION FROM SUB SPINDLE WITH CONFIRMATION AND AIR BLAST

Machinery Resources Int'l Inc
1650 Voyager Ave Simi Valley CA 93063
Tel: 877-568-2121 Fax: 818-346-7986
Email (Request Quote): inquiries@machineryresources.com
Web: www.machineryresources.com