ONE - USED HYD-MECH HORIZONTAL BANDSAW
MODEL: S-20P ♦ YEAR: 1996
Stock No. 9861

Specifications:
Max. cutting cap. 90 deg. round:13”
Max. cutting cap. 45 deg. round:12”
Max. cutting cap. 90 deg. square:13” x 13”
Max. cutting cap. 45 deg. square:12” x 12”
Max. cutting cap. 90 deg. rectangular:13” x 18”
Max. cutting cap. 45 deg. rectangular:13” x 10-3/4”
Max degree of miter:30 degrees
Blade dimensions:13’6” x 1” x .032”
Blade guides:Carbide
Guide arm (manual/powered):Manual
Blade speeds:75-400 SFPM
Number of speeds:Infinite
Blade motor:3 HP
Blade drive type:Pulley to gearbox
Blade tension type:Manual
Blade wheel size:16”
Head lift type:Hydraulic
Hydraulic motor:2 HP
Coolant tank capacity:6 gallons
Coolant type:Flood
Table height:30”
Number of vises:1
Vise type (manual/hydraulic/air):Hydraulic
Voltage:220/440
Dimensions:80” x 81” x 56”
Weight:1,800 lbs.

Equipped with:
•Hyd-Mech sequencer control with blade speed, readout and parts counter
•Flood coolant with wash down hose
•Mitering to 30 degrees in one direction
•Carbide blade guides
•Variable hydraulic down feed force
•Powered blade chip brush
•Manual length stop

Westbrook Engineering Co Inc
23501 Mound Rd Warren MI 48091-2048
Tel: 866-FOR-SAWS Fax: 586-759-3106
Email (Request Quote): info@westbrook-eng.com
Web: www.westbrook-eng.com