Mazak HD, Serial # 23578W, Built 1984 (est.)
Country of origin: Japan

GENERAL SPECIFICATIONS:
Swing over bed:
- bed 24"
- cross slide 14-1/2"
Swing in gap: 34-1/4"
Length of gap in front of face plate: 13-3/8"
Height from floor to work center: 43"
Distance between centers (max.): 120"
Spindle bore: 4-1/16"
Spindle nose taper: American Standard Taper #450
Spindle speeds: (12) 12-1,200 RPM
Feeds: fine (20); normal (40); course (30)
Threads:
- English (56)
- Metric (92)
- Module (50)
- D.P (70)
Compound rest top slide travel: 9-7/8"
Cross slide travel: 20-7/8"
Tailstock
- spindle travel 11-3/4"
- taper No. 6 Morse
Bed:
- length 187-1/4"
- width 22"
Motor: 15 HP, 220/440/3/60
Net weight (approx.) less accessories: 10,920 lbs.
Overall dimensions (approx.): 204" L-R x 53" F-B x 63" H (incld. DRO)

EQUIPPED WITH:
12" 3-jaw chuck; 18" 4-jaw chuck; (3) Steady rests (bushing style); 4-way tool
post; Slotted rear section of cross slide to accept special tooling; Threading
dial; Adjustable carriage stop; Tailstock crank transport mechanism; Flood
coolant system; (12) machine levelers; (2) Removable chip pans; Bausch & Lomb
"Acu-Rite II" DRO; Adjustable electric spindle brake; (2) Feed rod supports;
Graduated dials (inch); Power rapid traverse (see note); Dual spindle control
levers (headstock & carriage); Auto lube to carriage; Lamp.

NOTES:
* Damage to bed casting beginning along the rear way on which the tailstock
rides upon. The largest break occurs 39-1/2" from the headstock and runs 7-
1/2"; the other smaller break is a continuation of the first and runs an
additional 4-1/2". This damage does not affect the carriage movement.

* The Power Rapid Traverse needs attention. The motor runs but there appears
to a problem with the switch that is located in the control handle area.

* This lathe is the property of a third party hence no warranty exists, either
written or implied, and it is being sold "as-is" without a return privilege.
Other than the noted problems, the machine appears to be in good condition but
your inspection is welcome and encouraged.

F.O.B. Chicago suburb.

Value Machinery Co
29870 N Skokie Highway Unit 6 Lake Bluff IL 60044
Tel: 888-465-7999 Fax: 244-848-6222
Email (Request Quote): sales@valuemachinery.com
Web: www.valuemachinery.com