Model LE10A

GENERAL SPECIFICATIONS:
Capacity:
* standard configuration: 10" rounds; 7" x 12" flats
* with optional bundling vise: 4-1/2 to 7" W x 2" to 5-1/2" H
Off-cut length (min.): less than 2"
Blade size: 1" x 138"
Blade speeds: (5) 88, 130, 177, 223, 262 fpm
Feed stroke, single stroke: 3/8" to 16"
Multiple strokes: 9 times, 142" max. accumulative length
Feed specifications
* hydraulic hitch feed with vertical rollers
* 16" in 6 seconds
Length setup: front-mounted handwheel and DRO with large display
Main motor: 3 hp, 220V/3/60 (see options for 440 volt operation)
Hydraulic pump motor: 1 hp, 220V/3/60
Coolant pump: 1/8 hp, gear type
Hydraulic oil capacity: 5-1/4 gallons
Vise specifications
* quick-set ratchet type
* 600 lbs. clamping pressure
* ways precision hardened & ground
Work table: machined with chip clearance inserts
Hitch feed capacity: 2,790 lbs. using roller table
Hydraulic pump: runs only on demand with low pressure startup
Head feed: hydraulically regulated with rpm compensation
Parts counter: turns off machine when preset number (up to 9,999) is reached
Rapid head approach: hydraulically moistened; stops blade above workpiece
Coolant tank capacity: 10 gallons
Coolant pump: gear type with triple filter

EQUIPPED WITH:
Electrically-powered flood coolant system; PLC system control; Speed-
synchronized chip brush; "In-use" warning light; Auger-style chip conveyor;
Flood coolant system; Mechanical blade tensioning device; Roller table;
Florescent work lamp; Door safety interlocks; Low voltage (24-volt) control
circuit; Blade brush; Hydraulic quick disconnects for connecting optional
bundle vise attachments; One (1) bimetallic blade; Tool kit with extra blade
brushes & guide bearings.

FEATURES:
* Heavy gauge steel base provides rigid platform for saw.

* On-off coolant pump switch facilitates wet or dry applications.

* Full guard system protects operator. Hinges eliminate need to remove doors.

* Wheels incorporate cast lip to guide blade. Grooves accommodate tooth set.

* Feed length easily set using handwheel & DRO preset for blade width.

* Unique positive stop on hydraulic valve prevents blade from striking
workpiece as it rapidly descends to initiate cut, while simultaneously
setting upper and lower parameters to reduce dead air cutting.

* Saw head & vises hydraulically controlled using Hydraulics On Demand. HOD
runs the hydraulic pump only when hydraulics are needed. This keeps oil
temperatures low and eliminates pump wear. Even at the longest start setup
the pump runs no longer than 15 seconds.

* Heavy feed system supports material with large roller table and rollers,
with vertical rollers to contain material from side-to-side.

* Hydraulic Quick Disconnects expedite joining optional bundle vise
attachments.

* Clearly marked and simple-to-use control panel with florescent work lamp,
warning light and safety interlocks.

* Feed positioning switch permits adjusting feed vise during the cutting
cycle. Move forward for tighter grip and for bundle cutting, or move
rearward to rapidly advance the next piece.

* Hydraulically-controlled, gravity-fed head for hands-free cutting. Machine
automatically shuts off at end of cut.

* Ingenious combination Blade Chart and Dial automatically sets head feed rate
according to material type and diameter. Eliminates guessing.

* One-piece head casting pivoting on a large diameter axle with widely spaced
bearings enhances stability and durability.

* Gearbox contains highest quality bronze and steel gears.

* Gearbox driven by V-belt and step pulleys. Quick speed changes are easy with
spring-assisted motor mounting assembly.

* Operator is protected by 24-volt low voltage circuits and magnetic starter
which prevents motor from "mysteriously" restarting after power outage.

* Vise uses quick release ratchet to rapidly adjust to different material
sizes. Powerful hydraulic adjusting cylinder moves rear jaw a full 1".
The front jaw is split to hold workpiece on each side of the blade to
prevent the off-cut piece from tearing as blade nears the end of cut.

* Vertically mounted guide arms provide rigidity which promotes straight cuts.
Fully adjustable and replaceable roller blade guides working in conjunction
with pre-adjusted carbide blade inserts further enhance accuracy. Though the
carbide inserts are preadjusted, they can be re-adjusted via a knurled knob
mounted on the guide arms. The upper blade bearings are double-mounted on a
see-saw rocker that removes the "bounce" from welded blades and permits the
use of back-edge-ground blades for more aggressive cutting.

* Guide arms travel on a large guide rail. A Diameter Gauge on the rail
simplifies setting the arm spacing.

* A revolving circular chip brush cleans the blade teeth gullets. The brush
speed is synchronized to the blade speed for better cleaning and longer
brush life.

* The auger-style chip removal on this machine is more dependable than paddle-
type systems.

* One-year warranty. Buy with confidence.

F.O.B. Grand Haven, MI

Value Machinery Co
29870 N Skokie Highway Unit 6 Lake Bluff IL 60044
Tel: 888-465-7999 Fax: 244-848-6222
Email (Request Quote): sales@valuemachinery.com
Web: www.valuemachinery.com