Model B224

GENERAL SPECIFICATIONS:
Bed width: 2'
Ram height: 8"
Back gauge depth (max.):
* 19", except for below
* 21-1/2" on sheets 7" narrower than maximum width
Air required (max.): 4.4 cu. ft.
Speed, full stroke (max.): 20 spm
Shipping weight, less stand & other optional equipment: 1,920 lbs.

EQUIPPED WITH:
90 Deg. male punch; 4-Way bottom die (1-1/2" sq.) ; Lower die holder for all
standard press brake dies (slot 1/2" wide x 11/16" deep); Hooded foot control
valve; Manual back gauge; Quick-exhaust with muffler; Manual shut-off/speed
control valve and air line filter/regulator/lubricator.

OPTIONAL EQUIPMENT:
Pushbutton control
* two-hand pushbutton control in metal enclosure
* sheet support table 12" deep x bed length
* keyed mode-of-operation selector switch (key removable in all three modes)
- hand - simultaneously depress & hold pushbuttons to allow control with
foot valve
- foot - operate using foot valve only, hands free to hold parts
- off - press brake will not operate

Sheet support table: 12" deep, 10ga. welded steel fabrication
* 12" deep x bed length (specify if ordered separately)
* 10 ga. welded steel fabrication
* vertical adjustment
Note: Sheet Support Table included with Pushbutton Control option.

Floor stand:
* 10 ga. welded steel fabrication.
* corner mounting plates have a through-hole to accommodate anti-vibration
mounts or to bolt machine to the floor.

CNC back gauge system
* CNC 99 Autogauge controller coupled with a single axis, twin screw back
gauge to facilitate cell manufacturing, multiple bend work, or any application
requiring frequent back gauge changes.
* for a new machine or as a retro-fit package.
* offers programming capabilities for up to 99 jobs & 30 bends per job.

Micrometer back gauge
* Permits faster & more accurate set-up.
* Each unit independently adjustable from 0 to 4".
* Handwheel graduations read movement in .001" increments.
* Vertical & horizontal adjustments.

Extra shut height

Shut Height Box Depth (max.) Punch Height
7-1/2" 2.0" 3-3/4"
7-1/2" 3.7" 6-1/8" (see note 2)
9-1/2" (opt.) 5.1" 8-1/8" (see note 3)
11-1/2" (opt.) 6.5" 10-1/8" " " "
13-1/2" (opt.) 7.9" 12-1/8" " " "

Notes:
1. Above figures based on a max. thickness of 13 ga. using standard 4-way die.
2. 6-1/8" punch is extra but credit can be issued for 3-3/4" size
3. All tooling for "extra shut height" machines is optional.

FEATURES:
* Stroke power control: adjust air pressure
* Stroke speed control:
- inch to a scribed line
- stop or reverse at any point
- counterbalanced ram automatically reverses when foot control is released
or the air supply is terminated
* Stroke length control
- uses adjustable positive stop screw
- bed is adjustable to accommodate various dies & reduce pinch point
* Rugged Construction
- heavy steel plate limits deflection to less than industry standard of
.0015" per foot
- dual air cylinders & one-piece rocking lever resist off-center loads
- adjustable ram guides help assure continued precision
* Low maintenance
- completely pneumatic..do not have to service motor, clutch or brake
- limited number of moving parts simplify maintenance

New machine warranty: One year on machine, 90 days on consumable items
including pneumatics.

F.O.B. Northbrook (Chicago suburb), IL

Value Machinery Co
29870 N Skokie Highway Unit 6 Lake Bluff IL 60044
Tel: 888-465-7999 Fax: 244-848-6222
Email (Request Quote): sales@valuemachinery.com
Web: www.valuemachinery.com