Serial No 835-8
Model 1R, Ltr R


TO VIEW VIDEO:
https://youtu.be/bLsbm1OXny8


CATALOGUE SPECIFICATIONS:
Swing Over Table, Maximum.............. 10.875"
Grinding Diameter, Maximum............. 10"
Distance Between Centers, Nominal...... 20"
Grinding Wheel Diameter, Minimum....... 7.5"
Grinding Wheel Diameter, Standard...... 12"
Grinding Wheel Width, Maximum.......... 1.5"
Grinding Wheel Width, Standard......... 1"
Grinding Wheel Hole Diameter........... 5"
Table Swivel Taper..................... 4 IPF
Table Swivel Angle..................... 20-DEGREES
Headstock Swivel Range................. 120-DEGREES
Grinding Wheelhead Swivel Range........ 90-DEGREES
Workhead Center Taper.................. #10 JARNO
Tailstock Center Taper................. #6 JARNO
(2) Spindle Speeds, Range.............. 2000 & 2530 RPM
Workhead Spindle Speeds, Range......... 60 to 600 RPM
Table Longitudinal Feeds, Infinite..... 2 to 240 IPM
Grinding Wheelhead Spindle Motor....... 3 HP
Floor Space Required, L x D............ 8'10" x 4'2"
Weight, Approximately.................. 4100 LBS

EQUIPPED WITH:
Universal Swivelling Headstock
Hydraulic Longitudinal Table Feed - Manual In-Feed
One Shot Lube System - Coolant System


*See attached Warranty, Terms, Machine Use and Safety.
**These specifications are subject to verification upon inspection.
***Sold as Taken from Service

Scott Machinery & Supply Inc
PO Box 430 Helena AL 35080-0430
Tel: 205-664-9644 Fax: 205-664-9796
Email (Request Quote): info@scottmach.com
Web: www.scottmach.com