MODEL: 8-MARK-II

Capacity: 90 DEGREES: 18" X 22"
Capacity: 45 DEGREES: 18" X 12.75"

SPEED RANGE:
50-450 fpm infinitely variable speed drive system.

FRONT-MOUNTED SPEED CONTROL:
Allows blade speed to be adjusted from operator's control

station.

FEED RANGE:
0 - 140 lbs. infinitely variable direct reading scale

balance beam.

T-SLOTTED WORK TABLE:
Work area 24.25" x 33"; table height 34.5"; four machined T-

slots accept .625" (15.5 mm) T-Bolts.

MITER CUTTING:
Column and blade tilt up to 45 right and left of vertical;

work always stationary. Built in protractor.

QUICK ACTION VISE:
Maximum opening 18". Jaws can be shifted to either right or

left side of blade. Jaws are 6" high, 12" wide.

AUTOMATIC STOPS:
Adjustable stops can be pre-set to stop advance and return

of blade and to stop motor at any location within the 18"

travel of the blade.

COOLANT SYSTEM:
Built in with Flood system, available with added optional

drop lubrication system. Controlled by on-off selector

switch at operator's station. Tank capacity 21 gallons.

FLUSHING HOSE:
Washes chips from hard-to-get-at places reducing clean-up

time.

POWER CHIP BRUSH:
Together with blade wipers and flood coolant keep blade

teeth free of chips.

CARBIDE GUIDE SYSTEM:
Guides are stationary and can be rotated to present new

guiding surface to the blade. Upper and lower guides have

preloaded carbide-faced back-up blocks to support back edge

of the blade.

BLADE:
14' 6" Long x 1" Wide x .035" Thick. One Welded-Edge Band

Blade is furnished with each machine.

MOTORS:
Main; 5 H.P., 1800 RPM, totally enclosed fan cooled. Coolant

Pump; 1/8 H.P. enclosed motor-built-in integrally.


MADE IN THE U.S.A.!!

Scott Machinery Inc
4700 Lang Ave, Suite D McClellan CA 95652-6215
Tel: 916-638-7718 Fax: 916-638-2450
Email (Request Quote): sales@scottmachinery.com
Web: www.scottmachinery.com