Model: PR-613
Forming Width: 72"
Roll Speed: 5.85 rpm.
Upper Roll Dia.: 4.75"
Roll Adjustment Back: Hydraulic
Minimum Forming Dia: 7.125"
Motor: 3 hp
Capacity (Mild Steel): 13 ga. (.090")
Power: 220V / 3-phase
Shipping Weight: 4,950 lbs.
Shipping Dimensions: 112" x 30" x 50"


DESCRIPTION:

The PR-613 plate roll from Baileigh Industrial is just what
every HVAC shop is looking for. It has the ability to roll
13 gauge mild steel over its full 6' length to a minimum
diameter of 7-1/8". All three rolls of the PR-613 are
hydraulically driven by a 220 volt three phase 2 hp motor.
By having all three rolls hydraulically driven this will
increase the efficiency of the finished product. The back
roll on the PR-613 plate roll is also controlled by the
hydraulic system and has a digital position indicator, so
the operator knows exactly where the roll is at all times.

To ensure accuracy of the rolls during the forming process
the frame on the PR-613 is made from plate steel. These
pieces of steel frame work are integrated and fully welded
to reduce and virtually eliminate any flexing that can occur
at full capacity.

The PR-613 plate roll uses a control pedestal for some of
the bending functions; forward, reverse, up, and down.
Coning on the PR-613 is not a problem at all. An
independent control box allows the operator to raise or drop
one side of the back roll for accurate coning. To ensure
operator safety, we have included dual emergency stop cables
that are located on both the back and front of the machine.

Scott Machinery Inc
4700 Lang Ave, Suite D McClellan CA 95652-6215
Tel: 916-638-7718 Fax: 916-638-2450
Email (Request Quote): sales@scottmachinery.com
Web: www.scottmachinery.com