Model: CT350A-NC Fully Automatic High-Speed
Motor: 2.5 HP
Electricals (Specify One): 208, 220, 230, 440, 480, 3 PH
Max Blade (Inches): 14" (350mm)
Spindle RPM: 3600 RPM
Max Vise Opening: 8"
Weight: 1500 lbs.
Coolant Capacity: 5 Gallons
Work Height: 35.25"

CAPACITIES:
@ 90 Degrees:
Round: 4.75"
Square: 4.5"
Rectangular: 7.5" X 3.5"

@ 45 Degrees (R)
Round: 4.5"
Square: 4"
Rectangular: 5.9" X 2.75"

@ 45 Degrees (L)
Round: 4.5"
Square: 4"
REctangular: 5.9" X 2.75"

@ 45 Deg. Vert (L)
Round: 3"
Square: 2.75"
Rectangular: 7" X 2.25"


FEATURES:
* The CT 350 Series machines are high speed circular saws
for aluminum extrusions and other non-ferrous materials.
These machines feature swiveling capability for mitering and
swiveling/tilting capability for compound mitering.
* The machine operates automatically with air over hydraulic
system providing optimum sawing rates with minimum effort by
the operator.
* The CT 350A-NC is the easiest to use programmable saw on
the market today! Length setup is digital, and 100 jobs may
be stored for reuse, eliminating the need to set and reset
various parameters.

NOTE: This Machine will NOT cut ANY steel! Dont even think
about it!

STANDARD EQUIPMENT:
* Heavy Duty Drive, TEFC Motor
* 24 Volt Controls
* Disconnect Switch
* Hydraulic oil
* Variable Vise Clamping Pressure
* Blade speed indicator
* Work height and depth controls
* Heavy Duty Drive
* Preset stops, 0,15,30,45 degrees
* Removable extruded special jaws
* Length stop assembly
* Carbide tipped Blade
* Built it spray mist coolant
* Operators Tools
* All Safety Guards


OPTIONAL ACCESSORIES:
AC100 Freestanding Roller Conveyor 12" wide x 5' long,
1000 lb.
AC101 Freestanding Roller Conveyor 12" wide x 10' long,
2000 lb.
AC125 Custom Infeed Roller Conveyor, 12" wide x 6' long,
cover plates between rollers, coolant return through micro-
adjustable legs
AC103 Additional 6' section for above conveyor
AC133 Custom Outfeed Roller Conveyor, 12" wide x 6' long
cover plates between rollers, coolant return through, micro-
adjustable legs, mounted to machine
AC103 Additional 6' section for above conveyor
AC106 Vertical Side Guide Rollers for custom conveyors,
pair of 2
AC132 Chip Collection System, 1100 CFM, integrated into
machine electrical controls, mounted on 55 Gal drum (not
supplied)
AC135 "V" Jaws, interlocking for cutting bundles of tubes
or bars
AC129 "V" Guide Rollers for custom conveyors for use with
"V" jaws, pair 2

Scott Machinery Inc
4700 Lang Ave, Suite D McClellan CA 95652-6215
Tel: 916-638-7718 Fax: 916-638-2450
Email (Request Quote): sales@scottmachinery.com
Web: www.scottmachinery.com