Model: CL1600H
Working Area:
Column Sleeve Dia. (E): 17"
Column Face to Spindle Center:
Maximum (D + C): 62.2"
Minimum (D): 17.3"
Spindle Head Travel (C): 44.9"
Base Surface to Spindle End:
Maximum (A): 63"
Minimum (B): 15"
Arm Vertical Travel (A-B): 33.5"
Arm Rotation (Right & Left): 180 Degrees
Baseplate Working Surface: 70.9" x 40.4"
Box Table Area:
Length (L): 27.6"
Width (K): 19.7"
Height (H): 15.7"
Base Dimensions:
Floor Area (R x S): 97.6" x 41.3"
Height (Q): 8.26"

Drill Head:
Spindle Taper: 5MT
Spindle Stroke: 14.6"
Quill Diameter: 3.94"
Number of Spindle Speeds: 12
Spindle Speeds (RPM): 40-1920
Number of Feeds: 6
Spindle Feed Rate (in(mm)/rev): 0.003"(0.7mm)-0.038"(.96mm)
Spindle Drive Motor (2-Speed): 7.5 Hp
Elevating Motor: 2 Hp
Clamping Motor: 1 Hp
Coolant Pump Motor: 1/8 Hp

Capacities:
Drilling in Steel: 2.6"
Drilling in Cast Iron: 2.75"
Tapping in Steel: 1.97"
Tapping in Cast Iron: 2.36"
Boring in Steel: 5"
Boring in Cast Iron: 7.28"

Dimensions/Weights:
Max. Machine Height (F): 124.8"
Base and Column Height (G): 107.7"
Shipping Dimensions (L x W x H): 112.2" x 55.1" x 115.7"
Net Weight: 6,614 lbs.
Shipping Weight: 11,243 lbs.


STANDARD FEATURES:
* Equipped with hydraulic separate clamping unit. Vertical
movement of arm is coordinated by an IC timer. With a single
touch on push button switch, you can have the arm unclamped
then move vertically, or stop then clamp automatically. Very
easy to operate, and tools will always stay at the same
point after tool shifting.
* Gears in gear box are cooled by oil cycled by an oil
pump to minimize gear wear.
* Friction type disc clutch absorbs impact force caused by
vertical movement of spindle, and protects all transmission
units inside gear box. With quick spindle return, the clutch
will help speed-up the tapping operation.
* Special automatic tool eject device is supplied to allow
you to change tools quickly. (No drifter is required)
Special arm elevating device is provided to prevent arm from
falling down abruptly after years of usage.
* Coolant system
* CSA Electrics Standard
* Tool kit and manuals


TWO (2)-YEAR LIMITED WARRANTY!!

Scott Machinery Inc
4700 Lang Ave, Suite D McClellan CA 95652-6215
Tel: 916-638-7718 Fax: 916-638-2450
Email (Request Quote): sales@scottmachinery.com
Web: www.scottmachinery.com