MACHINE# 13086
          
          MANUFACTURER - WATSON STILLMAN
          MODEL - 3186-D
          PRESS TYPE - 4 ROD DESIGN - WATER HYDRAULIC DIRECT
          CAPACITY - 2000 TON (5000 LBS./SQ. IN.
          RAM STROKE - 36" 
          RAM DIA. - 33"
          MATERIAL - COPPER & BRASS AND RELATED ALLOYS
          PROFILES PROCESSED - VARIOUS SIZES & SHAPES (DIES NOT INCLUDED)
          CURRENT BILLET DIAMETER - 8" 
          BRASS                            COPPER
          7" x 10"                         6-7/8" x 25" OR 26"
          7" x 15"-20"                     7" x 10" OR 20"
          7" x 19"                         7" x 26" (STANDARD PURCH. BILLET)
          7" x 26" (ACTUAL  6-15/16")      7-1/2" x 25" OR 26"
          8" x 26" (ACTUAL  7-15-16")      8" x 26" (STANDARD PURCH. BILLET)
          EXTRUSION SPEED - PROPORTIONAL
           (VARIES PER SIZE OF DIE & SHAPE & LENGTH OF BILLET)
          CONTAINER SIZE - FOR 8" DIAMETER BILLETS
          NUMBER OF CONTAINERS - 5 TOTAL 
          HYDRAULIC SYSTEM - HIGH PRESSURE WATER ACCUMULATION
          
          CONSISTING OF:
          
          GRANCO CLARK 7-ZONE BILLET HEATING SYSTEM
          MANUFACTURER - GRANCO EQUIPMENT INC.
          YEAR - 1971
          TYPE - DIRECT FLAME IMPINGEMENT
          MODEL - 69-40-7-BC
          CAPACITY PER HOUR - 19,000LBS./HR. OF 9" DIA. BILLETS FROM ROOM TEMPERATURE TO 1600
          
          DEGREES F (OTHER ALLOYS & BILLET SIZES IN PROPORTION
          
          BILLET DIAMETER - 7" - 9"
          BILLET LENGTH - 19" -26"
          MAXIMUM TEMPERATURE - 1700 DEGREES FAHRENHEIT
          NUMBER OF CONTROLLED ZONES - 7 TOTAL, SINGLE ACTION PROPORTIONAL
          COMBUSTION - 16,000,000 BTU TOTAL INPUT ON DEMAND
          ELECTRICAL SERVICE - 440/3/60 WITH 110 VOLTAGE FOR CIRCUITS
          FUEL - 1000 BTU NATURAL GAS, RECOMMENDED AT LEAST 3 PSI SUPPLY PRESSURE
          
          (16,000 CFM MAXIMUM TOTAL DEMAND
          PLANT AIR - EQUIPMENT DESIGN FOR 80 PSI SUPPLY PRESSURE
          WATER PLANT - 40 GPM TOTAL
          CONTROLS PER ZONE - HONEYWELL
          BILLET LOADING TABLE & CHARGE TABLE
          BILLET DISCHARGE TABLE
          
          HYRDROWATT  126 GPM PUMP STATION - 500 HP RADIAL PISTON PUMP STATION
          MANUFACTURER - HASTEC ENGINEERING, INC.
          MODEL - R180/180S
          YEAR - 1999
          OPERATING PRESSURE - 5800 PSI
          PUMP SPEED - 1800 RPM
           MOTORS - (1) SIEMENS 500 HP, PUMP MOTOR, 480 V AC, 562 AMPS, 1785 RPM
           (1) BENSHAW 500 HP BENSHAW SOFT START MOTOR, NEW 2002
          CONTROLS - BENSHAW (2002) 
          ELECTRICS - 460 VOLT, 60 CYCLE, 3 PHASE 
          
          PRECHARGE PUMP
          MANUFACTURER - GOULD PUMPS, INC.
          MODEL - 3196
          STD. NO. - A50
          MOTOR - 30 HP LINCOLN, 480 V AC, 3600 RPM, MOD. 
          
          150 GPM HIGH PRESSURE HORIZONTAL PUMP
          MANUFACTURER - HIGH PRESSURE PUMP COMPANY
          MODEL - TYPE 3.5 3.187 15
          SERIAL NO. - 503299
          MOTORS - (1) WESTINGHOUSE 500 HP 590 RPM WESTINGHOUSE MOTOR MODEL HSDP,
          
          FRAME 6808-L, 3 PHASE, 480 V AC, 623 AMP
          (1) BENSHAW 500 HP Solid STATE SOFT STARTER, 480 V AC, 590 AMPS
          CONTROLS - BENSHAW
          
          DURCO MARK III LOW PRESSURE (BOOSTER) PUMP
          MANUFACTURER - THE DURIRON CO. INC.
           YEAR - 1994
          SIZE - 2X3X1.5X13/117RV, 3600 RPM
          MOTOR - RELIANCE ELECTRIC, 100 HP, 480 V AC, NEMA 12 ENCLOSURE (1999)
          
          HYDRO-PNEUMATIC ACCUMULATOR (VERTICAL TANK)
          MANUFACTURER - HIGH PRESSURE PUMP CO.
          SIZE - 4'-8" ID X 18'-6" H X 5/8" WALL
          
          DESPATCH CONTAINER PREHEATING OVEN (GAS FIRED)
          MANUFACTURER - DESPATCH OVEN CO.
          MAX. TEMP. - 2000 DEG.
          BLOWER - 7 1/2 H.P., 1800 RPM
          SIZE (CHAMBER) - 4' X 8' X 5'
          CAPACITY - 2 CONTAINERS
          LOAD - 7500 LBS.
          *PREHEATS CONTAINERS TO 600 DEG. FOR 6 HRS.
          
          DIE PREHEATING FURNACE
          MANUFACTURER - TRENT, INC.
          SERIAL NO. 864-180
          TEMP. - 2300 DEG. F
          
          DIE LOADING TABLE
          
          CIRCULAR BUTT CUTOFF SAW W/ MAYFRAN SCRAP CONVEYOR
          
          CIRCULAR SWING CUTOFF SAW
          
          100' ROLLER CONVEYOR RUNOUT
          
          LAYDOWN RACK 
          
          PRESS OPERATOR CONTROLS
          
               **PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**
          
          **ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**
          
          
          

Machinery International Corp
20 Commerce Dr North Branford CT 06471-1250
Tel: 203-484-0400 Fax: 203-484-4499
Email (Request Quote): sales@machyintl.com
Web: www.machyintl.com