MACHINE# 12385
          
          This Line was used to produce fin tubes in the air conditioning unit of
          
          automobiles.
          
          Products can also be used in coolant tubes in the home air conditioning
          
          units, copper channels, etc. Longitundinal type fins.
          
          The line consists of:
          
          Aluminum rod pay-off
          Rod straightening machine
          Rod washing unit with alcalic (2 chambers) and water (2 chambers)
          Rod extrusion press 
          Water cooling and air dryer
          Rewinder
          Air filler (protection for wound products on reel)
          Automatic tube cutting machines (Optional)
          
          Technical data:
          
          Washing unit
          Talk volume: Chamber 1 - 324L, Chamber 2 - 240L, Chamber 3 - 423L
          Washing type: Deposition type
          NaOH: 23%
          Washing water PH: Less than 10
          
          Extrusion press
          Manufacturer:                     Confex (UK, 1994)
          Motor:                            ABB 120kW
          Wheel diameter:                   308mm SKD-61
          Reduction ratio:                  81.43:1 Brevini
          1250 ~ 2000 RPM
          Oil pump 7.5L/Min
          Hydraulic line SC-Pump 0-500 475 ~ 500 bar
          
          Mechanical and technical specifications sheet
          Extrusion wheel diameter:         310mm(OD)
          Extrusion wheel material:         AISI H13 tool steel
          Extrusion wheel speed:            0/17.36/27.77rev/min
          Main drive motor type:            DC infinitely variable
          Main drive motor power:           120KW
          Main drive motor speed:           0/1225/2000 rev/min
          Main drive motor armature:        420 volts
          Main drive motor:                 ABB 225S
          Main drive gear box type:         3 stage planetary
          Main drive gear box reduction ratio:72:1 nom
          Main drive gear box lubrication:  recirculating oil
          Gear box lubrication flow:        6 L/min
          Max continuous torque at wheel:   66 kNm
          Input coupling:                   Fenaflex coupling
          Main shaft preload (at 33350 psi/2300 bar):3.77MN
          Top clamp preload (at 7250 psi/500 bar):0.61 MN
          Rear clamp preload (at 7250 psi/500 bar):2.26 MN
          Low pressure hydraulic system:    1000 psi/70 bar, flame resistant fluid
          Low pressure hydraulic flow rate: 7.5 L/min max
          Low pressure hydraulic fitted power:2.2 kW
          High pressure hydraulic system:   9140 psi / 630 bar max
          High pressure hydraulic pumps:    air/hydraulic intensifiers
          Main bearing:                     Cylindrical roller type, full compliment
          Main bearing capacity(dynamic):   2.36 MN
          Main bearing lubrication:         Recirculating oil
          Main bearing lubrication flow:    9 L/min
          Main bearing lubrication pressure:80 psi / 5.5 bar max
          Machine coolant:                  Recirculating water with corrosion inhibitor
          Machine coolant recirculating flow rate:75 L/min @ 6M head
          Feed stock diameter:              Diameter 9.5mm rod (aluminum)
          Output aluminum:                  280 kg/hr single feed
                                            560 kg/hr twin feed 
          Recommended product speed:        60 meters/min for multiport sections
          Maximum product size:             Within 50mm diameter circle
          Air services (control):           80 psi/5.5 bar
                                            1.0 m3/min peak
                                            Demand during shoe loading
          Electrical supply:                380/440 V
                                            3 phase
                                            50/60 Hz
          
          Rewinder
          New in 2001
          Motor 7.5kW
          1750 RPM
          Load: 1 Ton max
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          **PRICE QUOTED IS AS IS WHERE IS SUBJECT TO PRIOR SALE**
          
           **ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**
          
          
          

Machinery International Corp
20 Commerce Dr North Branford CT 06471-1250
Tel: 203-484-0400 Fax: 203-484-4499
Email (Request Quote): sales@machyintl.com
Web: www.machyintl.com