MACHINE # 10766
          
          CONTINUOUS CASTER:
            MANUFACTURER:                  TECHNICA GUSS
            YEAR OF MANUFACTURE:           1974
            MODEL NO.:                     250 DR 111 SNE
            STRAND DIAMETER:               2 x 8" DIAMETER OR 1 X 10" DIAMETER
                                           2 X (203.2mm) DIAMETER OR 1 X 10" (254mm)
          
                                           DIAMETER
            HOLDING FURNACE CAPACITY:       USAGE - 6200 KG
                                             HEEL - 2000 KG
          
          ELECTRICAL SPECIFICATIONS:       415 VOLT, 3 PHASE
                                            TWO (2) INDUCTOR COILS
                                           (TWO (2) SPARE COILS)
            HOLDING FURNACE:                           300 KW, 400 AMPS
            THREE (3) FLYING SAWS (EACH):               22 KW,  93 AMPS
            THREE (3) DRIVES (EACH):                    11 KW,  54 AMPS TOTAL
            ONE (1) HYDRAULIC TILT UNIT:               7.5 KW,  15 AMPS
            THREE (3) FANS:                5.5 - 1.5 - 2.2 KW,  20 AMPS TOTAL
          
            TOTAL CONNECTED LOAD:                              580 AMPS
          
          ONE (1) HOLDING FURNACE (3 STRANDS):
            INCLUDING:
             ONE (1) SPARE BODY (BARE)
             ONE (1) SPARE INDUCTOR (READY)
             TWO (2) SPARE COILS
             THREE (3) SPARE FRONT PLATES (INCLUDING COOLERS)
             ONE (1) SPARE W-CHANNEL MOLD
          
          ONE (1) WITHDRAWAL UNIT (3 STRANDS):
            INCLUDING:
             ONE (1) SPARE GEAR BOX (READY)
             TWO (2) SPARE HYDRAULIC DRIVES (READY)
          
          THREE (3) FLYING SAWS:
            INCLUDING:
             ONE (1) SPARE UNIT (READY)
          
          THREE (3) BILLET RUNWAYS
          
          THREE (3) BILLET STILLAGES
          
          INDUCTOR COILS:
            1. SCOTT CONNECTED  - BALANCED OVER 3 PHASES
            2. SECONDARY VOLTAGE FROM 170 VOLTS TO 540 VOLTS IN 10 STEPS
               (MANUALLY OPERATED VIA TAPPING SWITCH ON MAIN PANEL)
          
          PROCESS CONTROLLER:
            MANUFACTURER:                  SIEMENS SIMATIC
            MODEL NO.:                     SS 115U
            (SOME SPARES)
          
            TWO (2) PRIMING CHAMBERS, VALVES, PIPE WORK, FITTINGS AND CONNECTIONS
          
          TWO (2) CHANNEL INDUCTION FURNACES:
            MANUFACTURER:                  BIRLEC
            YEAR OF MANUFACTURE:           1973
            RATING (MAX./MIN.):             600 KW - 530 KW
            POURING CAPACITY:               USABLE - 5000 KG
                                              HEEL - 1700 KG
            NO. OF INDUCTORS:              TWO (2) - AIR COOLED
            POWER CONSUMPTION:             240 KW / TON
            MELTING RATE:                  2.5 TONS/HR. @ 950 DEGREES C.
            ELECTRICAL CONNECT:            415 VOLTS, 3 PHASE, 50 HERTZ
          
          GENERAL EQUIPMENT:
          - HYDRAULIC TILTING GEAR W/TWO (2) CYLINDERS CONNECTED TO HYDRAULIC POWER
          
            PACK. LIMIT SWITCH CONTROL.
          - INSTRUMENT (CONTROL) PANEL WITH OPERATOR CONTROL DESK.
          - CONTRACTOR PANEL FOR MAIN & STANDBY CONTRACTORS.
          - AIR CIRCUIT BREAKER FOR 3 PHASE, 415 VOLTS, 50 HERTZ SUPPLY.
          - 720 KVA SCOTT CONNECTED TRANSFORMER GROUP.
          - NATURALLY COOLED POWER FACTOR CORRECTION CAPACITORS.
          - TWO (2) FANS INCLUDING DUCT WORK.
          - FOUR (4) SPARE INDUCTORS - READY TO GO.
          - TWO (2) TRANSFER LADLE PLATFORM SCALES (10,000 KG) INCLUDING DIGITAL
          
            READOUTS, WALL MOUNTED SLAVE READOUTS (LARGE DIGITS) AND PRINTER.
          - ALL NECESSARY EQUIPMENT & FORMERS FOR FURNACE BODY & INDUCTOR REBUILDING.
          
          TWO (2) CHANNEL INDUCTION FURNACES (CONT'D):
            MANUFACTURER:                  IN-HOUSE DESIGN
            YEAR OF MANUFACTURE:           1961
            RATING (MIN./MAX.):            176 KW (MAX. 330 KVA - NOMINAL 298 KVA)
            POURING CAPACITY:               USABLE - 1000 KG
                                              HEEL -  600 KG
            NO. OF INDUCTORS:              ONE (1) - FAN COOLED
            MELTING RATE:                  1000 KG/HR.
            ELECTRICAL CONNECT:            415 VOLTS, 3 PHASE, 50 HERTZ
          
          GENERAL EQUIPMENT:
          - HYDRAULIC TILTING GEAR W/TWO (2) CYLINDERS CONNECTED TO HYD. POWER PACK.
          - INSTRUMENT (CONTROL) PANEL AND OPERATOR CONTROL DESK.
          - TAPPING TRANSFORMER (AUTO).
          - TWO (2) FANS INCLUDING DUCT WORK.
          - ONE (1) STATIC BILLET MOLD CARROUSEL.
          - 4 x 8 DEGREE MOLDS - 3 x 10 DEGREE MOLDS
          - ALL NECESSARY EQUIPMENT & FORMERS FOR FURNACE BODY & INDUCTOR REBUILDING.
          
          
          ***PLEASE NOTE***
          ALL EQUIPMENT IS DISMANTLED AND LYING IN STORAGE
          
          **PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**            
          
           **ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          
          

Machinery International Corp
20 Commerce Dr North Branford CT 06471-1250
Tel: 203-484-0400 Fax: 203-484-4499
Email (Request Quote): sales@machyintl.com
Web: www.machyintl.com