MACHINE 13867
          
          12,000 ton LOEWY-HYDROPRESS Heavy-Duty Water Hydraulic Extrusion
          
          Press w/Mandrel System for producing hollow parts such as Heavy
          
          Walled Pipe 
          
           Note: The Water Hydraulic Pumps that supplied the Press are not
          
           included as they are part of a larger Hydraulic System which
          
           supplies several other Presses.
          
          The Press comes complete with the following:
           All Valving
           Prefill and Atmospheric Tanks
           All related piping
           All existing Entry and Exit feed tables
           A Track-Mounted Action model 2860 Billet Manipulator installed
          
           next to the Press.
          Note that the manipulator needs some new valving and manifold as
          
          well as some linkages to be 100%.  The control system is still
          
          intact and the stand-alone Hydraulic Unit that accompanies the
          
          Manipulator will also be included.  Hydraulic schematics and the
          
          drawings to fabricate all of the components needed on the boom
          
          and head are available. The Manipulator has a working Carrying
          
          Capacity of 6,000 lbs fully extended but is rated at 10,000 lbs.
          
           Complete Electrical System including all Control Cabinets
          
           installed new in 2013
           PLC Controls including the Operator Console Pulpit installed new
          
           in 2013
           A large assortment of available spare parts
           All existing documentation including manuals, electrical and
          
           hydraulic schematics, foundation drawings, etc.
          
          
          Additional info:
          There is an existing Furnace installed next to the Press that
          
          could be available at additional cost as a separate item. It is
          
          an O'Brien and Gere Pulse Fire Box Furnace with an external
          
          footprint of 28' Wide x 22' Deep x 27' Tall.  Inside Dimensions
          
          are 22' Wide x 11' Deep x 9' Tall. If interested then we will
          
          provide a separate offer for the Furnace. The Furnace was
          
          installed new in 2012.
           
          In 2013 the Press was rebuilt and upgraded at a cost of over
          
          $3,500,000. USD. The Press Containers were rebuilt, all valves
          
          were rebuilt with new wear components, all brass was replaced for
          
          the container and rams and the Runout Table, the Quench System
          
          and the Kick-Off Rack were all rebuilt. Container Heating,
          
          Velocity and Tonnage control were all improved and a New Chop Saw
          
          was installed. Finally, all new PLC Controls and Control Pulpit
          
          were installed.
          
          After this work was done, the press only ran through the end of
          
          2014 and was shut down due to excess manufacturing capacity in
          
          the plant.
          
          The Press has been very well maintained and is in excellent
          
          working condition.
          
          It was used to produce materials such as Duplex, Super Duplex,
          
          Nickel Alloys, Titanium Alloys, 300 Series Stainless, 400 Series
          
          Stainless, 9 Chrome (aka P91) and Carbon Steel.
          
          In addition to pipes it also made an array of shapes.
          
          It was last used to produce heavy pipe up to 508mm (20") diameter
          
          and up to 50.8mm (2") wall thickness.
          
          On some diameters products were extruded up to 70 feet long and
          
          then Saw Cut to length.
          
          It is installed in a plant in the USA, is immediately available,
          
          and may be shown under power in case of serious interest!
          
          
          Specifications
          Tons                     12,000 tonnes
           
          Type                     Steel Tubular Sections & Pipe
           
          Builder                  Loewy
           
          Billet Diameter          660 mm (26")
           
          Mandrel                  Yes
           
          Main Ram Stroke          4,064 mm (160")
           
          Min Billet Dia           356 mm (14")
           
          Press Length             38 meters (125 Ft.)
           
             
          Note
          Additional info:
          
          Press rated tonnage capacity as follows:
            7,938.3 tons - only utilizing the Main Cylinder
            4,412.8 tons - only utilizing the (2) Lateral Side Cylinders - 
            12,138.8 tons - utilizing the Main and the (2) Lateral Side Cylinders
            together
          
          Billet size:
            max diameter  -  26.0" (660.4 mm)
            min diameter  -  14.0" (355.6 mm)
            max length    -  65.0" (1,651 mm)
          
          Press Rams:
          Central main ram cylinder tonnage rating  -  8,000.0 tons
          Central main ram cylinder diameter  -  68.687" (1,744.6 mm)
          Main ram stroke  -  160.0" (4,064.0 mm)
          Lateral auxiliary side cylinders tonnage rating x (2)  -  2,000.0 tons each
          Lateral side Rams diameter x 2 (each)  -  35.812" (909.6 mm)
          Lateral side ram stroke  -  160.0" (4,064.0 mm)
          Pullback Rams diameter x 2 (each)  -  19" (482.6 mm)
          Pullback ram stroke  -  160.0" (4,064.0 mm)
          
          Mandrel Rams:
          mandrel ram tonnage rating  -  511.0 tons
          mandrel ram diameter  -  17.5" (444.5 mm)
          gandrel ram stroke  -  65.0" (1,651 mm)
          mandrel return ram tonnage rating x 2 (each)  -  250.4 tons each
          mandrel ram diameter each  -  12.25" (311 mm)
          mandrel return ram stroke  -  65.0" (1,651 mm)
          Container Rams:
          container ram tonnage rating x 2  -  418.5 tons each
          container ram diameter  -  19" (482.6 mm)
          container ram stroke  -  69" (1,752.6 mm)
          container extend rams tonnage rating x 2  -  60.1 tons each
          container extend rams diameter x 2  -  12.25" (311 mm)
          container extend rams stroke  -  69" (1,752.6 mm)
          Side cylinder Boring diameter for cylinder bushings:
          Outside diameter: 1,450mm
          Inside diameter: 915mm
          Length: 5.6 meters
          Weight: 29 tons
          Side Ram dims:
          Outside diameter: 910mm
          Length: 5.3 meters
          Weight: 18 tons
          
          **Temporary Specifications Subject to Revisions**
          
          **PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**
          
          **ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**
          
          

Machinery International Corp
20 Commerce Dr North Branford CT 06471-1250
Tel: 203-484-0400 Fax: 203-484-4499
Email (Request Quote): sales@machyintl.com
Web: www.machyintl.com