GEMA 5-STAGE DRY POWDER & WET PAINT SYSTEM QUOTE# 75C-685

MODEL/TYPE: 50” x 84” x 96”L x 600# Parts – Manual sprayAGE: 2000

SPECIFICATIONS & DESCRIPTION – Data is approximate:

System specs: Line Speed: 4- 12 FPM - Work Ware: 50” W x 84" H x 96"L, Line speed – approx 10 FPM
Approx System footprint: 75'W x 150'L, Pre-treatment: 5-Stage washer / Air Blow Off & Cure Oven
Note: We could supply an automatic full recovery Dry Powder Booth if required as an option for additional cost

Description of components:
5-Stage Industrial washer / Black Iron & SST Steel Construction: 50”W x 89”H part opening
Overall Dimensions: 75'L x 7-1/2'W x 10'6”H - Straight thru design Air Curtins & Vestibules - both ends
Stage 1: Wash zone - Heated phos wash / Immersion fire-tube – 1 M BTU, gas fired 1700 gallons
Stage 2: Ambient rinse zone - 5 HP gusher type pump / 850 gallons
Stage 3: Heated Iron Phos wash - gusher type pumps, Immersion-fire-tube, 440 BTU gas fired / 850 gallons
Stage 4: Ambient rinse zone - Vertical gusher type pump – 425 gallons
Stage 5: Ambient Seal - final Rinse - Vertical gusher type pump – 425 gallons
Construction: Black welded Steel tanks, mild steel & SST upper housings, 4-6’ long drains – OAH: 9’6”
Components & Accessories: Natural gas type Burners (stages: 1 ,3) CPVC Risers, Nylon nozzles, PVC piping
Air Blow Off

Heating Section: Cure Oven:
4 M BTU Gas - fired: 4" Thick Panels, air curtins, 56”W x 84”H part – 2 pass design, single end entry/exit
Dimensions: 14’ W x 75” L x 9’-6” H, construction: interlocking galvanized steel panels
Equipped with (2) 25000 CFM Recirculation blowers – Rated @ 500 degrees F

Monorail system: No 458 Monorail chain, roller type trolleys – Heavy duty load design – Floor Supports Caterpiller HD Drive system – VDF type: 2 – 15 FPM line speed range – A
prox 700’ OAL Open I-beam type
Vari-speed drive unit, (1)sliding take up unit, (12) 90 degree turns - approx 100’ spare chain,chain oiler & cleaner

Coating Equipment:
(1)GEMA Opti-Flex Dry powder spray booth – manually operated / Spray to waste design
Equipped with a Torit Dust Collector unit and manual spray gun – Approx 15’ OAL

(2)In-Line ‘Wet’ Spray booths – set-up for Front and Back side spraying – Manual operatio
Approx 10’ each and equipped with Roof top exhaust venting, Regulator gages and Sprinkler heads
Steel panel construction – pneumatic type exhaust system, open front deign – 10’ W each

Industrial Resources Inc
PO Box 505 Old Saybrook CT 06475-0505
Tel: 860-388-3439 Fax: 860-388-2740
Email (Request Quote): ray@industrial-resources-inc.com
Web: www.industrial-resources-inc.com