MODEL/TYPE: Straight Line / 6 Head Polishing machine
NEW: 1990's

SPECIFICATIONS & DESCRIPTION:
This Berlynn-Acme straight line automatic polishing table is designed
to buff and/or polish work that is fixtured on it's 20' long horizontal
table which reciprocated back and forth under six heavy duty, fixed
position acme polishing heads that are located three (3) each per side
of the table and adjusted into a fixed position to accomodate any part
configuration (or work) to be processed. An automatic operation with
adjustable table speed and work cycles

SPECIFICATIONS & DESCRIPTION:
Machine configuration: Straight Line operation -
Mode of Operation: Reciprocating Horizontal work table
Over all floorspace / footprint required: (approx) 25' L x 9' W x 8'H
Work Range - work capacity envelope as arranged: 16" W x 60"H
Note: a larger work envelope could be processed by fixturing that
allowed the work to extend beyong the 16" wide platen width of the
table - The max height dimension would be limited to the max height
Adjustment up (vertically) of the buffing heads on their respective
columns.

Horizontal Table w/reciprocating platen / dimensions: 20"W x 20'L table
/ 16"W x 48" L platen
Table is located 30" above floor
Platen horizontal stroke: approx 48"
Platen reciprocating speed / gear box w/sprocket & chain
Variable speed
Reciprocating Cycle - variable timer
Emergency stop buttons - both ends
Travel control: Adjustable limit switches

Buffing Heads: Acme Standard duty series G-4 heads
6 each - configured 3/side
Note: these are individual buffing heads mounted on columns
w/floor mount base -
these could be reconfigured around the work table as required -
Dimensions of Heads: Mounting based: 20" x 20" steel base/
floor bolted design - OAH: approx 8-1/2'
Total height of column: 96" above floor:
Range of adjustment of head on column: 72"
Buffing head spindle data: Spindle shaft length: 10"
Spindle dia: 1-1/4"
Equipped with: air lifts & wheel wear compensator
Individual head timers/independent controls

ELECTRICS: Buffing Heads: 3 HP motors / 1750 RPM constant speed
230/460V - 3 Ph - 60 Hz
Operator Control Panel - portable type - complete with all controls,
timers & safety switches

CONDITION: Machine is in very good condition. Recently removed from
service - immediate release

Industrial Resources Inc
PO Box 505 Old Saybrook CT 06475-0505
Tel: 860-388-3439 Fax: 860-388-2740
Email (Request Quote): ray@industrial-resources-inc.com
Web: www.industrial-resources-inc.com