STANDARD SPECIFICATIONS

WORK PIECE CAPACITY
-24" MAX WORK PIECE DIAMETER GROUND W/NEW WHEEL
-4" MINIMUM WORK PIECE DIAMETER GROUND W/WORN WHEEL
-24.38" MAX DIAMETER OVER TABLE (SWING)
-6500LBS MAX WORK PIECE WEIGHT
-240" NOMINAL WORK PIECE LENGTH
-244" MAXIMUM WORK PIECE LENGTH

WHEEL HEAD
-36" MAX GRINDING WHEEL DIAMETER (NEW)
-12" COLLET HOLE DIAMETER
6.0" MAX GRINDING WHEEL WIDTH
6500 SFPM GRINDING WHEEL SPEED
25HP/240 VOLT MOTOR

SLIDING TABLE TRAVERSE
-INFINITE NUMBER OF TRAVERSE RATES
-3 TO 120 IPM RANGE OF TRAVERSE RATES
-0 TO 18 SECONDS TABLE TARRY ADJUSTMENT, EACH END INDEPENDENT
-1/8" PER REV OF HAND WHEEL HAND TABLE TRAVERSE
-3HP MOTOR

HEAD STOCK
-NO. 13 B & S WORK PIECE CENTER
-16 TO 200 RPM HEAD STOCK SPINDLE SPEED RANGE
-7.5HP MOTOR

FOOT STOCK
-NO. 13 B & S WORK PIECE CENTER
-5" CENTER MOVEMENT (SCREW TYPE)

HYDRAULIC TANK
-25 GALLON CAPACITY
-P-38 CM SPECIFICATION OIL
-135-165 VISCOSITY (S.U.S. 100 DEGREE F)
-12 GAL/MIN MAIN PUMP CAPACITY
-1.5 GAL/MIN 500 PSI CAPACITY
-3HP HYDRAULIC PUMP MOTOR

WAY LUBRICATION TANK
-10 GALLON CAPACITY
-P-47 CM SPECIFICATION OIL
-128-346 VISCOSITY (S.U.S. 100 DEGREE F)
-0.4 GAL/MIN PUMP CAPACITY
-0.25HP PUMP MOTOR

COOLANT TANK
-150 GALLON CAPACITY
-0.5HP PUMP MOTOR

ELECTRICAL POWER
-460 VOLT / 3 PHASE / 60HZ

NET WEIGHT
-63,000 LBS

EQUIPPED WITH
-36" OD GRINDING WHEEL
-6" WIDE GRINDING WHEEL
-24" SWING
-244" BETWEEN CENTERS
-BALANCING GRINDING WHEEL
-6500LBS MAX WORK PIECE SIZE
-HYDROSTATIC BEHIND THE WHEEL DRESSER
-6500 SFPM
-VARIABLE SPEED HEAD STOCK
-25 HP SPINDLE MOTOR
-PLUNGE
-PICK FEED
-TARRY LEFT & RIGHT
-SHOULDER GRINDING ATTACHMENT
-COOLANT TANK & PUMP
-CINCINNATI ECIII CONTROLS

Presses For Industry Inc
20501 Hoover Rd Detroit MI 48205-1075
Tel: 313-839-9300 Fax: 313-839-9600
Web: www.pressesforindustry.com