PRELIMINARY SPECIFICATIONS

6" NOMINAL WORK SWING
18" NOMINAL DISTANCE BETWEEN CENTERS
6-7/8" MAX DIA MACHINE WILL GRIND WITH FULL SIZE WHEEL
10-1/2" MIN DIA WHEEL TO GRIND ZERO DIA WOR ON CENTERS

38-3/4" HEIGHT FROM FLOOR TO WORK CENTERLINE

WORK CARRIAGE:
2-240 IPM TRAVERSE SPEED
.200" TRAVERSE PER TURN OF HAND WHEEL
20 DEGREES INCLUDED ANGLE
1/4-2" WORK REST CAPACITY (NOT INCLUDED)

HEAD & FOOT STOCK:
#10 JARNO HEAD STOCK WORK CENTER
#6 JARNO FOOT STOCK WORK CENTER
60/90/150 HEAD STOCK SWIVEL RANGE
225/400/600 RPM WORK SPEEDS
1" DIA HOLE THROUGH SPINDLE
5A2 HEAD STOCK SPINDLE NOSE

WHEEL HEAD & FEED
16" X 1" X 15" GRINDING WHEEL (STANDARD)
3" MAXIMUM GRINDING WHEEL WIDTH
1500/1900 RPM GRINDING WHEEL SPEEDS
9-1/2" MIN DIAMETER OF WORN WHEEL

MAX DISTANCE FROM WHEEL CENTER TO WORK CENTER

12-1/2" FOR HYDRAULIC INFEED MACHINES
11-1/2" FOR HAND WHEEL FEED MACHINES
2-1/2" MIN DISTANCE CENTER TO CENTER W/ FOOT STOCK REMOVED
.100" DIA REDUCTION PER REVOLUTION OF WHEEL FEED HAND WHEEL
.001" DIA REDUCTION PER REVOLUTION OF FINE KNOB
.000050" MIN FEED GRADUATIONS ON DIAMETER
.090" MAX HYDRAULIC INFEED ON DIA FOR HYDRAULIC INFEED MACHINES
1" RAPID INFEED STROKE FOR HYDRAULIC INFEED MACHINES

EQUIPPED WITH:
AUTO PLUNGE CYCLE
HYDRAULIC TABLE TRAVEL
BEHIND WHEEL TRU-FORM DRESSER
BIJUR LUBE
LH & RH TARRY
HAND TRAVERSE
TABLE DOGS
9-1/4 GALLON HYDRAULIC TANK
19 GALLON COOLANT TANK
3 HP WHEEL DRIVE MOTOR
- 1750 RPM
1/4 HP DRIVE MOTOR
1/4 HP WHEEL SPINDLE LUBRICATION MOTOR
1/10 HP COOLANT PUMP MOTOR
1 HP HYDRAULIC PUMP MOTOR FOR MACHINES WITH HYD TRAVERSE

APPROX O.A. WEIGHT: 3750LBS (W/ HAND TRAVERSE & HAND WHEEL)
- 4,050 LBS (W/HYD TRAVERSE & HAND WHEEL)
- 4,000 LBS (W/ HAND TRAVERSE & HYD INFEED)
- 4,150 LBS (W/ HYD TRAVERESE & HYD INFEED)

APPROX O.A. DIMENSIONS:

APPROX FLOOR SPACE: 106" X 50"

Presses For Industry Inc
20501 Hoover Rd Detroit MI 48205-1075
Tel: 313-839-9300 Fax: 313-839-9600
Web: www.pressesforindustry.com