PRELIMINARY SPECIFICATIONS

MODEL D200-18X18
NEW 2002
Stock width (with special grippers): Minimum 5.82 in. to Maximum 18 in.
Maximum stock thickness: .090 in. x 18 in. wide
Maximum stock thickness thru straightener: .060 in. x 18 in. wide
Minimum stock thickness: .023 in.
Feed strokes: 0 in. to 18in.
Maximum strokes: 70 per minute x 18 in. long
Feed stroke length accuracy Plus or Minus: .001

EQUIPPED WITH:
Outboard electric controls.
Pilot pin feature.
Safety guards.
Noise control system.
Adjustable support leg.
Hardened edge guides.
Hardened clamping anvils.
Guide bar retainers.
Outboard hand wheel on stroke length adjustment.
T Handle wrench fixed to adjusting screw clamping block.
Large diameter stroke adjusting screw.
Gripper quick release valve.
Limit switches with 15 foot cords.

APPROXIMATE DIMENSIONS

44" X 105" X 59"T

Feed is ruggedly constructed. It has a high pressure pneumatic gripper head
that grips material, advancing it by cycling between one fixed and one easily
adjusted solid hardened steel stop. An air cushion built into the gripper
brings material to a controlled stop for accurate positioning. Prior to
gripper releasing material, a pneumatic retainer head with hardened anvils
clamps the stock, permitting gripper to return for another stroke.
Interlocking actions between gripper and retainer are maintained by a pressure
sequence valve assuring consistent feeding. A limit switch is supplied and is
to be mounted on the press for control of feeding cycle.

PILOT PIN FEEDING

When feeding piloted dies, material is momentarily released during pilot pin
entry. A second limit switch is furnished for this operation and is to be
mounted on the press.

IN LIKE NEW CONDITION

Presses For Industry Inc
20501 Hoover Rd Detroit MI 48205-1075
Tel: 313-839-9300 Fax: 313-839-9600
Web: www.pressesforindustry.com