The 17M Hypoid Tester is designed for testing the running qualities of

straight bevel, spiral bevel, zerol bevel and hypoid gears whose shafts

intersect at 90 degrees. There is a pre-set backlash control mechanism to

assure increased accuracy and production of testing.

EQUIPPED WITH:

ACURITE Digital Readout
Backlash Setting Dial 0.001
Draw Rods
Worklight
Automatic Lube
Electrical Schematic
Sequence of Operations

SPINDLE RUNOUT:

Drive Spindle Bore: .00015
Drive Spindle Face: .0001
Driven Spindle Bore: .00015
Driven Spindle Face: .0001

SPECIFICATIONS:

Max. Diameter of Gear: 20"
Speed of Drive Spindle: 1200 rpm
Max. Offset of Gear Spindle Above or Below Center of Pinion Spindle: 3 1/2"
Max. Distance from Center of Gear Spindle to Nose of Pinion Spindle: 12"
Min. Distance from Center of Gear Spindle to Nose of Pinion Spindle: 4 3/4"
Max. Distance from Center of Pinion Spindle to Nose of Grear Spindle: 10 3/4"
(Hydraulic Machine has 3" Additional Movement for Withdraw of the Head)
Min. Distance from Center of Pinion Spindle to Nose of Gear Spindle: 3 1/2"
Belt (3 Required "V" Type): No. B75
Horse Power of Motor Required: 5
Floor Space: 53" x 59"
Net Weight (Approximately): 4,500 lbs

Gibbs Machinery Company
21500 Hoover Rd Warren MI 48089-3160
Tel: 586-755-5353 Fax: 586-755-0304
Email (Request Quote): sales@gibbsmachinery.com
Web: www.gibbsmachinery.com