TRAVEL: SH-8000
X-Axis Travel: (Longitudinal Movement of Column) 51.2"
Y-Axis Travel: (Vertical Movement of Spindle Head) 47.2"
Z-Axis Travel: (Cross Movement of Table) 43.3"
Distance from Pallet Surface to Spindle Center: 2.0"- 49.2"
Distance from Table Center to Spindle Gage Plane: 7.9”- 51.2”

TABLE:
Pallet Working Surface: 31.5” x 31.5”
Maximum Workpiece Swing Diameter: 51.2”
Pallet Loading Capacity: 4,400 Lbs. <5,720 Lbs.>
Maximum Workpiece Height: 51.2"
Table Surface Configuration:M16 (1/2-13 UNC) Tap: 24 Holes, Pitch (6.2”)
Minimum Table Indexing Angle: 1° [Rotary Table: 0.001 Degree]
Table Indexing Time: 3.4 Sec./ 4.2 Sec. (90°)

SPINDLE:
Maximum Spindle Speed: 15,000 RPM
Number of Spindle Speed Ranges: 1
Type of Spindle Taper Hole: 7/24 Taper, No. 50
Spindle Bearing Inner Diameter: 4.3"

FEEDRATE:
Rapid Traverse Rate: 1,653.5 IPM
Feedrate: 0.01-1,653.5 IPM
Jog Feedrate: 0-50 IPM <15 Steps>

AUTOMATIC TOOL CHANGER:
Type of Tool Shank: CAT 50 V-Flange
Type of Retention Knob: 90° Type
Tool Storage Capacity: 60 Std.
Max. Tool Diameter: (without adjacent tools) 4.9" (12.6")
Max. Tool Length: 19.7"
Max. Tool Weight: 66 Lbs.
Method of Tool Selection: Fixed address,shorter route
random access
Tool Change Time: (Tool-to-Tool) 2.5 Sec.
Tool Change Time: (Chip-to-Chip) 6 Sec.

AUTOMATIC PALLET CHANGER:
Number of Pallets: 2 Standard
Method of Pallet Change: Turn-Type
Pallet Changing Time: 14 Seconds

MOTOR:
Spindle Drive Motor: (30 min./cont.) 40/33.5 HP
Feed Motor: (X,Y & Z Axis) 7.9/9.7/9.7 HP
Hydraulic Pump Motor: 3 HP
Coolant Pump Motor: 1.3 x 2 HP

Ditter Industries Inc
PO Box 367 Lake Villa IL 60046-0367
Tel: 847-265-1075 Fax: 847-265-1078
Email (Request Quote): sales@ditterindustries.com
Web: www.ditterindustries.com